Clips, Clamps

There are various mechanical tools available that find application in holding, clasping, binding, or securing different materials, joints, etc. Clips and clamps are two popular means for achieving the same. Both have slightly different wakes of working, but nonetheless, both find a lot of use in everyday life, especially for professional applications. Let us discuss more the two mechanical devices. 
 

What Are Clips and Clamps? Application & Functions
 

As stated above, clips and clamps are mechanical tools for the purpose of binding things. Of the two, clips are more popular in everyday life, while clamps are popular for mechanical work such as carpentry, plumbing, etc. Thus, both of them are fasteners. A clamp is a kind of fastener used to apply pressure from the inside to securely hold or secure things together in order to avoid movement or separation. When a tool is intended for temporary usage to temporarily place components during construction or carpentry, the word "cramp" is often used in the United Kingdom instead. There are several varieties of clamps produced for a wide range of uses. Some are designed to be permanent, while others are temporary. A clip is a tiny mechanical fastener, often constructed of materials such as plastic or steel, that is created specifically to keep objects together.
 

Importance of Clips and Clamps
 

The importance of ad clips and clamps can never be overstated. The article below gives descriptions of various types of clamps and clips and their purpose. But as stated, the purpose of this device is to act as either temporary or permanent fasteners. They are used in woodworking, metalwork, medical applications, etc. Every carpentry shop is filled with clamps. If you go to a salon, you will find different types of clips. Clips have been used to create products such as clipboards, to prevent the movement of sheets while writing. 
 

What Are the Advantages of Clips and Clamps?
 

Clips and clamps are fasteners. Who would have thought that joining two materials together could become so challenging? It might be challenging to remember which clamp to employ for your project among the various varieties there are. Clamps are available for lifting, metalworking, woodworking, and special events. Tools that can hold work firmly in place temporarily include clamps. Woodworking, sawing, furniture design, welding, building, and metalworking are just a few of the various uses for them. There are guidelines to follow while clamping, such as always placing a scrap piece of wood between the teeth of the clamp and any wooden components to avoid harming them. Additionally, always use at least two clips to restrict rotation, and provide clamp force perpendicular to the component to avoid slippage. Don't tighten the clamp too much. The clamp might be damaged by overtightening.
 

What Is the Various Type of Clips and Clamps?
 

There are various types of clips and clamps. Let us discuss the types of clamps first, and then we will discuss the clips. Clamps can be segregated into temporary clamps, permanent clamps, medical application-based clamps, or other application-based clamps. Temporary clamps can be further classified into the following types of clamps, which have been discussed along with their features below. 

• Band Clamps: A band clamp is a general word for a holding tool that typically consists of a strap made of metal or fabric that has been forcedly adjusted in order to apply pressure to an item within the loop. The band of a web clamp, a particular kind of band clamp, is typically formed of webbing made of nylon fabric. It can stretch and glide around things with odd shapes, including frames, bundles, skids, and even trailer loads. The band is either mechanically tightened using a ratchet or ratchet mechanism to provide clamping pressure, or the elasticity of the band fiber itself applies clamping pressure. 
   
• Bar Clamp: A form of the clamp is an F-clamp, often called a bar clamp. The "F" shape gives the object its name. This tool is used in metallurgy to hold items with each other for welding or bolting, or in carpentry to hold together pieces while more permanent attachments are being constructed with screws or glue. 
   
• C-Clamp: They are also called G clamps, that is often used in welding and carpentry to secure a wooden or metallic workpiece. They were once known as a wagon maker's clamp or carriage clamp, however. Although smaller clamps could be constructed of pot metal, C-clamps and G-clamps are normally made out of steel or cast iron. 
   
• Flooring Clamp: A flooring clamp, sometimes known as a cramp, is used to keep flooring in place while it is being installed. Tongue and groove flooring is held in place with the aid of a flooring clamp while different panels are face-nailed. At one time, up to 8 or 10 boards may be clamped. There must be at least two, however, more is more common. To keep the flooring boards level and in position for attachment, the clamp is put over a joist. The next step involves the usage of a handle to provide horizontal pressure on a bearing board used as a substitute.
   
• Gripe: When constructing a clinker boat, a gripe is a basic kind of clamp used to hold the strake temporarily while it is being placed onto the other. Given that the strake is large and rather thin, the device must have a considerable reach and only a limited amount of movement. This is accomplished by using two pieces of solid wood, usually oak, each somewhat longer than twice as broad as the strake. 
   
• Step Clamp: To hold an item in position during milling operations, step clamps are a kind of clamp with serrated edges that are used in combination with stepped frames in the manufacturing process.
   
• Holdfast: A holdfast is a provisional clamp for securely fastening a workpiece. Traditional holdfasts, a kind of bench dog, are available with a curled or flattened head. As soon as the point of its hook meets the piece, its shank is loosely pushed into a slot in the workbench or anvil. The shaft fits securely against the edges of the hole after being struck atop with a mallet or hammer to set it. It may be released by tapping the top of its back.

Permanent clamps can be classified into Hose clamps, Marman clamps or wire rope clamps. Hose clamps can be further broken down into screw clamps, spring clamps, wire clamps or ear clamps. It is a tool for fastening and sealing a hose to a connection such a hook or nipple. A Marman clamp is a heavy-duty band clamp that enables the end-to-end clamping of two cylindrical objects using a ring clamp. It is sometimes referred to as a "Marman ring." It comprises of a strap that is circular with an inside V-groove. By attaching a threaded bolt to the strap's ends using nuts, tension is exerted to the strap. The V-groove on the circular components to be joined wedges over flanges as the tension rises, creating the pressure that binds the extremities of the two chambers together. An alternative to the heavier and more labour-intensive bolted flange connection is the Marman clamp. Another kind employs a flat strap to keep a cylindrical item in place or when systems convey minimal pressure.

There are various types of medical clamps. Of the many, the few of the important ones are Foerster Clamp, Hemostatic clamp, Gomco Clamp, Pennington Clamp etc. A medical clamping with a rounded eyelet is called a Foerster clamp. It is also called a sponge stick or sponge clamp and used in thoracic surgery to grip lung tissue without harm. Foerster clamps are often used to squeeze bleeding areas and remove tiny quantities of fluid from the surgical region while holding a sterile sponge in the jaws. A haemostat is a surgical instrument used in numerous surgical operations to stop bleeding. It is also known as an artery forceps, haemostatic clamp, or pean after Jules-Émile Péan. Because of this, it is typical for the first cut to be lined with haemostats, which seal off blood vessels before being tied. Haemostats are a kind of pivoting device where the function of the instrument is determined by the structure of the tip. Clips can also come in varied types. Few of the common known ones are discussed here. Binder clips are used to keep heavier materials (like thick stacks of paper) together. A typical binder clip is the Bulldog clip. Hair clips are used to keep hair in place or to attach items like hats to the hair. Paper clips are used to join many sheets of paper. Crocodile clips, sometimes known as "alligator clips," are temporary electrical connectors. Circlips are semi-flexible metal rings used to secure pins. Roach clips are holders for cannabis cigarettes. Bread clips are used to close bags. A money clip is a tool for compactly keeping cash and credit cards. A rail clip is a rail fastener.
 

FAQ's: Clips, Clamps
 

Q. What is the difference between clips and clamps?

Ans: Both are fasteners. Clamps are generally used for carpentry, woodworking metal work, medical applications, Clips are used for stationary and home applications. However, both are binders.
 

Q. What is an example of clips and clamps?

Ans:Example of clips are hair clips, paper clips etc, while examples of clamps are C clamp, G Clamp, Hose clamp, etc.
 

Q. What is the use of clips and clamps?

Ans: The article thoroughly discusses the use of different kinds of clips and clamps. Both are fastening mechanical tools. 
 

Q. How to use clip and clamp?

Ans: It is prescribed to first find out the application and select either to use clips or clamps. Both cannot be used interchangeably. Select the right fastening agent and follow the instructions mentioned by the manufacturer.