Pure Essential Oils Fixed Container Spreader

Fixed Container Hoist

BOFO fixed container hoist's structure consists of middle frame,
gables and hydraulic, electric and control system.

Different operating functions can be added by equipping the basic
frame with accessories such as: longitudinal moving of centre of
gravity, longitudinal tilting, rotating/turning, bail sway damping,
head block connection or fixed rope equipment.

Middle frame

Frame is welded steel composition, used material S355 SFS-EN.
Firm beam structure with minimized weight.

Telescoping gables

Welded steel composition, material used: S355 SFS-EN. Attaching method of corner locks is so called floating construction. Equipped with corner steering wheel. Side and gable guides are firmly attached, the structure is flexible and collision-proof.

Hydraulics system

Power unit designed from standard components especially to container hoist for demanding circumstances. Both gables equipped with own valve groups for controlling corner locks and controls. Piping and tubing are leak-proof and shock-resistant.

Electrical and control system

• Reservation for feeding and control cables (cabling from hoist is not included in the delivery)
• High-quality components
• Weather-proof central case with cooler/heater
• Marked wirings for terminal blocks
• Logic controlled control and locking information
  

Lubrication

Every lubrication point is equipped with lubrication nipple. Centralized and covered lubrication option available. Lubrication instructions are delivered with maintenance instructions.

Surface treatment

EPPUR120/2-FeSa2,5 ( = 120 ). Shade of color RAL 1006 ( yellow ). Different surface treatment on request

Documents

Maintenance and operation instructions, CE certification, conformity assurance, spare part catalogue and related drawings are included in the delivery. Documents are also delivered in digital form.

Approvals

BOFO products designed and manufactured by Rannikon Konetekniikka Oy are manufactured from high-class materials and products are tested at factory before delivering them to customer. Manufacturing process always follows necessary standards and regulations set by authorities.

CONTAINER HOIST FUNCTIONS

Corner locks

Corner locks have open / close function, which is controlled from hoists cockpit. State data is acquired from corner locks which is permission condition for lifting. Open / close stance is secured both mechanically and electrically. Corner locks can not be opened during the lift and lift cannot be performed if all four corner locks aren't open / close. Corner locks can be opened or closed only after container has been identified. Corner locks can be opened also manually under special condition. As standard equipment there is connection for hydraulic hand pump in both gables (each containing control for two corner locks). Hand pump can be acquired as an accessory.

Side and gable controls

Controllers have also up / down function which is controlled from hoists cockpit. Controlling: sides and gables separately or side + gable concurrently

Accessories

Limited hydraulic turning (Hydraulic operation)

• path + 15
• extra weight approx. 2000
  

Unlimited manual / automatic turning N x 360 degrees

(hydraulic / electromechanical) extra weight approx. 700

Longitudinal moving of centre of gravity (Hydraulic operation)

• Path +800
• Extra weight approx. 700
• Longitudinal tilting(Hydraulic operation)
• Path 5
• Extra weight approx. 500
  

Extension frame for lifting extra high containers

ACCESSORIES FUNCTIONS

Limited manual turning

• To ease the positioning the hoist and placing the container.
• Hydraulically operated turning + 15 degrees, controlled from hoists cockpit.
• Turning time about 10 seconds per 15 degrees
  

Unlimited manual turning

• To ease the positioning the hoist and placing the container
• Hydraulically operated turning N x 360 degrees, controlled from hoists cockpit
• Turning speed 1-1,5 / min
  

Longitudinal moving of center of gravity

• Hydraulically moved carriage is controlled from hoists cockpit to obtain balanced state
• Path +800mm, movement time is about 15 sec for both directions
• Carriage is returned in center position automatically after releasing the corner locks
  

Longitudinal tilting

• To ease container handling on inclined plane
• Tilting angle +5 degrees. Movement time about 8 seconds to both directions
• Hydraulically controlled from hoists cockpit
  

Extension frame for lifting extra high containers

Extension frame's corner locks are controlled manually and individually for both gables. Corner lock operator helps with controlling the frame and ensures the correct operation of the locks.

Main technical information of the
container hoist: