Industrial Container Spreader Input: 4-20ma

CS 2040 BTR Container Hoist

CS - 2040 - BTR container hoist is developed
for constant and demanding use in changing and harsh climate.

STRUCTURE

Middle frame Welded steel composition, material used: S355 SFS-EN. Firm, box-like structure with minimized weight.

Telescoping arms
Box grid structure, material used: S355 SFS-EN and Raex steel. Guide tracks equipped with machinery. Grease lubrication for guide tracks.

Telescoping gables

• Welded steel composition, material used: S355 SFS-EN.
• Attaching method of corner locks is so called floating construction.
• Equipped with corner steering wheel.
• Side and gable guides are firmly attached, the structure is flexible and collision-proof.
  

Hydraulics system

• Power unit designed from standard components especially to container hoist for demanding circumstances.
• Both gables equipped with own valve groups for controlling corner locks and controls.
• Piping and tubing are leak-proof and shock-resistant.
  

Electrical and control system

• Reservation for feeding and control cables (cabling from hoist is not included in the delivery).
• High-quality components.
• Weather-proof central case with cooler/heater.
• Marked wirings for terminal blocks.
• Logic controlled control and locking information.
  

Lubrication
Every lubrication point is equipped with lubrication nipple. Centralized and covered lubrication option available. Lubrication instructions are delivered with maintenance instructions.

Surface treatment
EPPUR120/2-FeSa2,5 ( = 120 ). Shade of color RAL 1006 ( yellow ). Different surface treatment on request.

Documents
Maintenance and operation instructions, CE certification, conformity assurance, spare part catalogue and related drawings are included in the delivery. Documents are also delivered in digital form.

Approvals
BOFO products designed and manufactured by Rannikon Konetekniikka Oy are manufactured from high-class materials and products are tested at factory before delivering them to customer. Manufacturing process always follows necessary standards and regulations set by authorities.

CONTAINER HOIST FUNCTIONS

• Length adjusting of telescoping arms
• Length adjusting according to containers length is controlled from hoists cockpit
• Arms are resized to next pre-programmed length with selection extend / shorten
• At the length of 20 ft the telescoping arms calibrate themselves
• If the length of telescoping arms is changed due to a collision, the arms will resize themselves to the right length after corner locks are opened.

Corner locks

• Corner locks have open / close function, which is controlled from hoists cockpit
• State data is acquired from corner locks which is permission condition for lifting
• Open / close stance is secured both mechanically and electrically
• Corner locks can not be opened during the lift and lift cannot be performed if all four corner locks aren't open / close. Corner locks can be opened or closed only after container has been identified
• Corner locks can be opened also manually under special condition
• As standard equipment there is connection for hydraulic hand pump in both gables (each containing control for two corner locks). Hand pump can be acquired as an accessory.
  

Side and gable controls
Controllers have also up / down function which is controlled from hoists cockpit. Controlling: sides and gables separately or side + gable concurrently.

Longitudinal moving of centre of gravity

• Hydraulically moved carriage is controlled from hoists cockpit to obtain balanced state
• Path +800mm, movement time is about 15 sec for both directions
• Carriage is returned in center position automatically after releasing the corner locks.
  

Longitudinal tilting

• To ease container handling on inclined plane
• Tilting angle +5 degrees. Movement time about 8 seconds to both directions
• Hydraulically controlled from hoists cockpit.
  

Unlimited manual turning

• To ease the positioning the hoist and placing the container
• Hydraulically operated turning N x 360 degrees, controlled from hoists cockpit
• Turning speed 1-1,5 / min
  

Bail sway damping
For damping the lifting ropes swinging in the multipurpose hoist. Loops for attaching to the lifting ropes. Damping with two hydraulic dampers
Adjustable damping sensitivity

Accessories
Telescoping arms for 40t load
extra weight approx...1400 kg

Limited hydraulic turning
path 15 mm

ACCESSORIES FUNCTIONS

Telescoping arms for 40t load
Sturdy telescoping arms for extra large cargo. Makes it possible to handle a 40t, 40ft. container. Manouvres as standard version. NOTE! Unloaded weight of container hoist increases by 1400kg!

Limited manual turning
To ease the positioning the hoist and placing the container
Hydraulically operated turning + 15 degrees, controlled from hoists cockpit
Turning time about 10 seconds per 15 degrees

Automated beam following
To ease loading and unloading the container will keep it's position related to the hoists beam during the turning. Electrically operated rotation can be N x 360 degrees. Hoist is equipped with separated probe and control center. Customer is responsible for cabling he system

Technical Information