Acid And Alkali Resistance Epoxy Enamel

We have carved out a unique position in industry by Manufacturing and Supplying supreme quality collection of Acid and Alkali Resistance Epoxy Enamel from Ahmedabad, Gujarat, India.

Product Details:-
Full Cure: Minimum 7 Hays at 30 deg C
Flash Point: Above 25 deg C (75 deg F)
Packing: 20 liters. 4 liters and 1 liter
Mixing Ratio: Base to Catalyst - 3 : 1 by volume
Overcoating Time: 24 hours minimum and 5 days maximum
Colour Available: White, Black, Cream, Light blue, Light green, Light grey, Dark grey, etc.
Finish: Smooth and Glossy
Thinner Recommended: Chamak Epoty thinner
Covering Capacity on Smooth Mild Steel Surface: 9 to 10 sq. mL/lt, for 40 micron dry film thickness
Maturation Time: 30 minutes

Other details:
Excellent Acid & Alkali Resistance
Excellent Abrasion & Scratch Resistance
Good looking as Matt, Satin & Glossy Finish

Recommended Use:
It is used in tanks, chemical plants, oil refineries, fertilizer complexes, etc. where outstanding chemical resistance is essential. it is also recommended as floor coating in Locations where chemical splashes, petrol spillage etc, It is also suitable for tea fermentation floor, laboratory furniture, etc.

Recommended Primer:
Chamak Epoxy Zinc Phosphate Red Oxide Primer
Chamak Epoxy Zinc Chrome Primer Yellow

Pot Life of Mixture:
Surface Dry - 30 to 40 minutes.
Hard Dry - Overnight.

Self Life:
As long as morello' remaining unmixed and containers are kept firmly seated, it can be stored upto six months without deterioration.

Direction for Use:
Remove dust, oil, grease, moisutre and loose flakes, etc. Sand blast mild steel surface. Prime and surface with recommended primer, after overnight drying, sand with emery paper. Mix base and hardner in the recommended ratio and allow to molure for 30 minutes. Apply by brush or spray using recommended thinner. For spray application apply a mist coat, allow to dry for about 10 minutes and then apply full spray coat. Stir the contents thoroughly before use.