Paint & Allied Products

(13878 products)

CHEMI ENTERPRISES LLP

8 Years

Business Type: Distributor | Exporter

Mumbai

F 50 Elmotherm Insulating Varnish

Price: 330 INR (Approx.)

MOQ - 21 Kilograms/Kilograms

HARNAWA INC

5 Years

Business Type: Manufacturer | Distributor

Mumbai

Liquid Thinner

Price: 30 INR (Approx.)

MOQ - 100 Kilometer/Kilometers

SWASTIK INTERCHEM PRIVATE LIMITED

8 Years

Business Type: Manufacturer | Exporter

New Delhi

A. B. ENTERPRISES

19 Years

Business Type: Manufacturer | Distributor

Mumbai

NORD DRIVESYSTEMS PVT. LTD.

12 Years

Business Type: Manufacturer | Exporter

Pune

Recovered Acetone

Price: 10.00 - 100.00 INR (Approx.)

MOQ - 10 Piece/Pieces

GALAXY CHEMICALS

13 Years

Business Type: Manufacturer | Distributor

Gandhinagar

Chlorinated Rubber Paint

Price: 250 INR (Approx.)

MOQ - 1000 Kilograms/Kilograms

JYOTI INNOVISION PVT. LTD.

9 Years

Business Type: Manufacturer | Exporter

Ahmedabad

Berger Powder Coating

Price: 1000.00 - 3000.00 INR (Approx.)

MOQ - 100 Liter/Liters

BERGER PAINTS INDIA LIMITED

4 Years

Business Type: Manufacturer | Supplier

Kolkata

DTRA ENGINEERS

15 Years

Business Type: Manufacturer | Exporter

Bahadurgarh

Horror Mask Mineral Turpentine Oil With Longer Shelf Life

Price: 89 INR (Approx.)

MOQ - 1000 Liter/Liters

SHAIKH PETROLEUM

7 Years

Response Rate: 100.00%

Business Type: Manufacturer | Distributor

Ankleshwar

SMARTECH SAFETY SOLUTIONS PVT. LTD.

2 Years

Business Type: Manufacturer | Supplier

Pune

Birkan Engineering Industries Pvt. Ltd.

12 Years

Business Type: Manufacturer

Ghaziabad

ANAND ENGINEERS PVT. LTD.

5 Years

Business Type: Manufacturer | Supplier

Mumbai

BHAVANI REFRACTORY

10 Years

Business Type: Manufacturer | Service Provider

Ankleshwar

Powder Titanium Dioxide Rutile

Price: 245.00 - 255.00 INR (Approx.)

MOQ - 500 Kilograms/Kilograms

CHEMVERA SPECIALTY CHEMICALS PVT. LTD.

8 Years

Business Type: Manufacturer | Distributor

Mumbai

Paint And Concrete Remover Bu 8150 Grade: Industrial

Price: 18500 INR (Approx.)

MOQ - 1 Piece/Pieces

BUVICO SPRAYING EQUIPMENTS

13 Years

Business Type: Manufacturer | Distributor

Chennai

DADIA CHEMICAL INDUSTRIES

7 Years

Business Type: Manufacturer | Supplier

Mumbai

Heat Resistant Paint Application: Industrial

Price: 300.00 - 800.00 INR (Approx.)

MOQ - 210 Liter/Liters

WITMANS INDUSTRIES PVT. LTD

18 Years

Business Type: Manufacturer | Exporter

Mumbai

Tio2 Titanium Dioxide Application: Industrial

Price: 400 INR (Approx.)

MOQ - 500 Kilograms/Kilograms

GOLDEN MICRO CHEMICALS

1 Years

Business Type: Manufacturer | Exporter

Thane

Anticorrosive Paint Application: Industrial

Price: 1500 INR (Approx.)

MOQ - 1000 Square Foot/Square Foots

UGAM TECHNOLOGY

4 Years

Business Type: Manufacturer | Service Provider

Vadodara

Pre-Complex Driers

Price: 100000.00 - 150000.00 INR (Approx.)

MOQ - 10 Unit/Units

K-TECH (INDIA) LIMITED

21 Years

Business Type: Manufacturer | Exporter

Thane

L. N. CHEMICAL INDUSTRIES

1 Years

Business Type: Manufacturer | Distributor

Navi Mumbai

5Kg DI Primer

Price: 100.00 - 500.00 INR (Approx.)

MOQ - 100 Kilograms/Kilograms

STAR COATINGS & MEMBRANES PVT. LTD.

2 Years

Business Type: Manufacturer | Supplier

New Delhi

OM MIDWEST INDUSTRIES

9 Years

Business Type: Manufacturer | Exporter

Delhi

Shah Brothers

Business Type: Trading Company

Mumbai

Wood Stains Dyes

MOQ - 2 Carton/Cartons

TECHNO COLOR CORPORATION

20 Years

Business Type: Distributor | Exporter

Vapi

JAY AGENCIEZ

18 Years

Response Rate: 84.64%

Business Type: Manufacturer | Distributor

Surat

Paint & Allied Products Manufacturers | Suppliers in India

Company NameLocationMember Since
K-Tech (India) LimitedThane, India21 Years
Techno Color CorporationVapi, India20 Years
A. B. EnterprisesMumbai, India19 Years
Witmans Industries Pvt. LtdMumbai, India18 Years
Jay AgenciezSurat, India18 Years
Dtra EngineersBahadurgarh, India15 Years
Galaxy ChemicalsGandhinagar, India13 Years
Buvico Spraying EquipmentsChennai, India13 Years
Nord Drivesystems Pvt. Ltd.Pune, India12 Years
Birkan Engineering Industries Pvt. Ltd.Ghaziabad, India12 Years

Paint & Allied Products: Characteristics & Types
 

Introduction

Paints and associated products include anything that is meant to be applied to a surface and is made up of a resin, pigment, solvent, and/or additives, such as stains, varnishes, shellacs, adhesives, putties, sealers, inks, caulks, and other coatings.

The Paints and Allied Products industry uses a wide variety of bulk components, from powders to huge chunks, from dry to greasy. Common characteristics of materials are:

1. Abrasive

By combining a grit of sand-sized particles with pressurized air to generate a stream of high-velocity nanoparticles, corrosive blasting can be used to clean metal things like metal structures or to add a roughness to poured concrete. In the shipbuilding and refining sectors, CS is used as an abrasive blasting medium to clean steel surfaces of paint, corrosion, and other contaminants before they are coated with fresh materials.

2. Adhesive

The term "adhesion" is used to describe the strong connection between a coating and its substrate. One of the most important characteristics of paints and coatings is their adhesion, which determines how well the coating (or paint film) sticks to the surface and how long it stays there, especially in harsh environments.

3. Cohesive

Adhesion refers to how well all of the coatings in a multi-coat painting method adhere to the substrate, whereas cohesion is how well those individual coats adhere to each other. When two molecules of the same substance come together, they are held together by cohesion forces. Similar molecules tend to stick together due to attractive forces between their atoms.

4. Dense

Most high-solid paints have a density of 1.3 g/cm3. It is applied to steel structures for defense against the elements, whether at sea or on land. It is the essential supplementary element for this benchmark.

Typical Paint & Allied Products
 

Some examples of paints and allied products that are typically made with powder and bulk ingredients are:

1. Damp Proofing

This type of paint is designed to withstand the effects of moisture on interior walls. It is also possible to use this paint as a primer before applying a decorative topcoat. Remember that moisture-proofing is NOT a replacement for addressing the source of the dampness! Yes, damp-proof paint may prevent damp in your home if you use the appropriate method and high-quality brand.

2. Aquatic Primer

Improve the topcoat's durability and adhesion on wood, drywall, and metal using Aqua Primer for All Surfaces. In addition to being safe to use indoors and being environmentally friendly, it also has a low volatile organic compound (VOC) content, so it doesn't produce any unpleasant odors. As a primer and sealer, Aqua Coat Primer is an acrylic product that is applied using water. It's a premium, fast-drying solution made for industrial use.

3. Asphalt Emulsion

Whenever asphalt cement is blended with water, the result is known as an asphalt emulsion. It consists of asphalt, water, and an emulsifying agent. The emulsifying agent, often known as the surfactant, consists of very big molecules.

Soap molecules are shaped like tadpoles because they have a hydrocarbon tail that dissolves in asphalt and an ionic head that dissolves in water. The ionic charge around the asphalt particles keeps the droplets separated and floating in the water.

4. Asphalt Primer

Asphalt Primer is a multipurpose utility primer coat for asphaltic Paint & Allied Products like waterproofing, dampproofing, roof coatings, and more to be applied on concrete, gypsum, masonry, brick, and metal surfaces.

5. Appliance Paint

Unlike regular paint, appliance paint is formulated to be used on appliances. This paint is typically included in repair kits for brand-new appliances, but it can also be purchased separately to alter the appearance of older models.

6. Ceiling Paint

Paints specifically made for the ceiling are thicker and have been engineered to have a stronger hold on the surface, resulting in fewer drips and runs that can be difficult to correct once dry. Also, certain ceiling paints are better than others at covering up blemishes and creating a smooth, uniform surface on your ceiling.

Types of Paint & Allied Products
 

1. Cement Paint

Distemper paint is a type of paint that is made out of glue, chalk, lime, water, and pigment and is also sometimes referred to as whitewash or cement paint. To my knowledge, it ranks up there with the first paints. It is now commonly accessible as paint, but historically, distempers were sold in powder form and had to be blended before being applied to walls.

2. Synthetic Rubber Paint 

Paints made from synthetic rubber are made by dissolving synthetic resins and then mixing in the appropriate pigments and solvents. The use of pigments allows for the creation of virtually any shade.

3. Anti-Corrosive Paint 

Anti-Corrosive Paints are perfect for protecting metal surfaces since they are made with anti-corrosive materials like fine sand, zinc chrome, and linseed oil. Corrosion protection does just what its name says, protecting metals and other metal-based surfaces against deterioration.

4. Aluminum Paint 

Aluminum paint, often known as aluminized paint, is a coating created by combining oil or spirit varnish with aluminum flakes or particles. Since spirit varnish speeds up the drying process, it can be utilized regardless of the situation.

5. Bituminous Paint 

Industrial paints are used to cover pipes, steel, wood, and outside construction, and there are many different kinds. Bituminous paint is made with dissolved asphalt and/or tar, giving it a black, tar-like appearance and strong alkali-resistance capabilities.

6. Enamel Paint 

Enamel paints, which use an oil-based solvent, share many characteristics with oil paints, including a delayed drying time and a durable finish. Enamel paints are a pricey option for homeowners, but they last a long time, adhere well, look great, and withstand water and stains.

7. Emulsion Paint 

Emulsions are typically quick-drying water-based paints, as opposed to the slower-drying oil paints traditionally used. Paint contractors choose it because it lasts longer and resists alkalis, has a more substantial texture, and has better color retention properties.

8. Oil Paint 

Most often, oil paints require three coats: primer, undercoat, and finish. Water-based paints have caught up to oil paints, which were once the standard because of their durability and longevity on surfaces. Oil paints provide a rich finish, are weather-resistant, and can persist for a long time because of their gloss and durability.

Ingredients Used In Paint & Allied Products
 

1. Alumina Trihydrate

The powder coating transfer aid alumina trihydrate (ATH) is widely utilized.

2. Carbon Black

Carbon black can be used to make coatings that are either conductive or non-conductive.

3. Salt

The salt provides a barrier. Whenever salt comes into contact with the paper, it lightens the color there. Due to the salt's restraining effect, the lighter area will be bordered by a darker tone.

4. Powder paint

It is frequently used to provide a vast demand that is stronger than regular paint. Powder coating is typically used for coating of metals, including household items, aluminum extrusions, drum hardware, vehicles, and bicycle frames.

5. Pentaerythritol

Pentaerythritol (PE) is primarily utilized to create resins and lubricants that are used for refrigeration, great-quality protective coatings, explosions, and other uses.

6. Nepheline Syenite

Micronized functional filler and extender nepheline syenite are used to improve the performance of a wide variety of coatings, adhesives, sealants, and inks.

7. Manganese Dioxide 

It is employed as a black glaze and for paintings on ceramic, faience, and majolica, as well as a Drier for oil paintings.

8. Slag

Slag's purpose is two-fold. It prevents the weld from corrosion and pollution from the atmosphere.

9. Silica Sand

Silica sand is included in paints and coatings to enhance the look and endurance of the paint. Because of its ability to soak up oil, silica sand is an excellent filler for creating long-lasting paint that retains its color and is resistant to filth and abrasion.

10. Zinc Oxide

Zinc oxide helps prevent mildew growth, slows corrosion, and repels stains. Zinc Oxide is the major white pigment also known as zinc white or Chinese white.

11. Limestone

Pigments and fillers for higher-end paints can both be made from limestone. Limestone is also used in the production of paper.

12. Isophthalic Acid

The primary applications of isophthalic acid are as an intermediary in the production of high-performance UPR, coating resins, high-solids paints, gel coats, and as a modifier of PET for bottle production.

FAQs: Paint & Allied Products
 

Q. What are the features of Paint & Allied Products?

Ans. Here are the features:

  • Weather resistant
  • Aesthetic Coating
  • Waterproof
  • UV resistant
  • Washable 
     

Q. What are the applications of paint & allied products?

Ans. They protect color, provide texture, Cover surfaces, decorate walls, evaporate, and more. 

Q. What are major paint & allied products manufacturers In India

Ans. Asian Paint, Shalimar Paint, Berger, Nerolac, and Indigo paints are some best Paint & allied product manufacturers in India. They provide 100% high-quality water-resistant paint for exterior and interior uses. 

Q. What is the price of paint & allied products?

Ans. The price of paint & allied products is between Rs 450- Rs 1000/liter.

Related Topic:

Top 10 Paint Manufacturers in India


Related Categories

 
Post Your Buy Requirement
One Request
Multiple Quotes