Clear Glossy And Clear Matt Polyurethane Coating

Having an exceptional information in this industry, we are involved in Manufacturing and Supplying an exceptional quality variety of Clear Glossy and Clear Matt Polyurethane Coating to our clients by being centered in Ahmedabad, Gujarat, India.

Product Details:-
Packing: 20 lit, 4 lit, 1 lit
Finish: Smooth and either Glossy or Matt.
Flash Point: Above 25 deg C
Curing Time: 30 minutes
Recommended Use: For application on wood and metal
Thinner: CHAMAK PU-thinner
Mixing Ratio: Base to Hardner in 3: 1 by volume

Drying Time:
Surface dry: Approx. 30 minutes
Hard dry: Approx. 12 to 15 hours
Recoating: After 4-5 hours

Covering capacity:
9 Sq. meters/litres per coa by brush
6 Sq. meters/liter per coat by spray

Application Viscosity:
For brushing: 25 to 30 sec. by Fc-4 @ 30 deg C
For spraying: 20 to 30 sec. by Fc-4 @ 30 deg C

Directions:
Sand the surface along the grains with suitable sand paper. Wipe the surface clean free of loose dust. Now fill the surface with wood filler, Sanding sealer. After 2/3 hours of drying, sand it again with the suitable paper. Again ensure that surface to be coated is free loose dust etc. Now take out CHAMAK base and hardner in glass or plastic or enameled container and mix them in 3:1 ratio (by volume). Let the mixture stand for 30 minutes for cure. Now apply by brush or spary, using recommended thinner. Use the mixture within 4 hours. After 48 hours of application buff the surface with buffing mops to enhance gloss if CHAMAK Clear Glossy is applied.