One Coat Stucco Gyploc Plaster at Best Price in Surat

One Coat Stucco Gyploc Plaster

Price:

Get Latest Price

In Stock

Product Overview

Key Features

One Coat Stucco Gyploc Plaster

One Coat Stucco Gyploc Plaster is a gypsum based plaster suitable for application of bull marks, level strips, ceding plaster,corner & edges and on sand-cement plastered surface. It consist of gypsum hemihydretes formulated with special additives to enhance working and setting characteristics It contains light weight aggregates to improve plaster's workability coverage, application and post usage behavior It dries taster saves lime and helps progress of Work.

Features

Direct application on RCC, Sand Cement plastered surface and Surfaces to be repainted
Free of shrinkage cracks
High coverage of 90m2iNfir with fast seeing
Very smooth finish is possible
Requires zero maintenance
Enhanced light reflectance, imparts true colour tone and gloss for paint
It is compatible with all typeset paints
Available in 25 kg packaging.

Technical specification

Parameter	units	Range
Colour of Finished Surface Bulk Density	(kg.m³)	700-800
Compact Density	(kg.m³)	1125
Setting Time	(minutes)	25-30
Coverage at 8mm thickness	(m2/ Tonne)	88-93
Surface Smoothness		smooth
Workability	easy
Compressive Strength	N/MM²	5.90

Application Methodolo

The background to be plastered should be thoroughly brushed with broom to be tree from all loose particles and dust. Wash and clean traces of mould oil.
Recommended usage of Gyploc plaster, a high performance bonding agent to eliminate hacking
In case of hacking follow specifications SO hack marks per sq. fl. and hack marks should be at least 6 mm to 8 mm deep.
it is recommended to pre wet the surface before application so as to achieve more spread and higher coverage.
Mix gypsum plaster to water (not vice versa). use a mixing rod to mix the paste thoroughly.
Water to Plaster ratio (1 Part of Water : 1.5 Part of plaster) should be maintained to have good cohesive workable mix.
Prepare plaster mix much as required deoending upon the immediate scope of work,
Once the mix has begun to set, additional workability, cohesivness, adhesion and strength
Avoid using a wet brush on to the finished surface, as that would leave permanent brush marks and spoil the surface
A single coat should not exceed 8mm in thickness. If at all thickness required is more than 8 mm, plaster is to be applied in multiple coats (Use of gyploc it recommended for higher thickness)
After complete drying for usually 72 hrs. (depending on the thickness and weather conditions), the plain smooth leveled surface is ready for painting.

The advantages