Easy To Clean Easy To Clean Stucco Plaster at Best Price in Surat

Easy To Clean Stucco Plaster

Price:

Get Latest Price

In Stock

Product Specifications

Color	Beige
Bulk Density	650 kg/m3
Compact Density	1150 kg/m3
Setting Time	15-25 minutes
Coverage	270 m2/1000kg
Surface Smoothness	Smooth
Compressive Strength	70-75 kg/cm2
Features	Superior finish, Heat resistance, Weather resistance, Excellent insulation, Simulates wood/stone, Ornamental interiors, Gradual setting, High quality, Impact resistance, Fire resistance, No shrinkage, High adhesion, More coverage, Excellent smoothness, Good sound absorption

Product Overview

Key Features

We are placed among the striking organizations, engaged in offering an
excellent quality Stucco
Plaster.
It is suitable for wall punning, decorative
ceilings with sharp ornamental features, rosettes, cornices etc. This plaster
is processed under the supervision of our vendors' experts by calcining high
purity natural Gypsum with the help of advanced
technology. The offered Stucco
Plaster is available in various packaging
options as per the exact demands of our clients. Our provided plaster can be
easily availed from us at industry leading rates.

Features:

Provide superior finish to concrete
surface
Resistance towards heat and weather
Excellent insulation
Suitable to simulate wood or stone

Super White Plaster
For Ornamental Interiors
Gradual Settings
Consistent High Quality
Good Impact Resistance
Fire Resistance
No Shrinkage Cracks
Very High Adhesion
More Volume and Coverage
Excellent Smoothness
Good Sound Absorption

Technical Specification:

	Stucco Plaster
Color of Finished Surface	Super White
Bulk Density (kg/m3)	650
Compact Density (kg/m3)	1150
Setting Time (Minutes)	15 - 25
Coverage at 13mm thickness (m2/1000 kgs)	270
Surface Smoothness	Smooth
Workability	Easy
Compressive Strength (kg/cm2)	70 - 75

Application:

Plasters are applied using hawk and trowel method as per recommended practice, where the thickness in one should not exceed 13 mm. plasters can be applied on most existing surfaces. This suitability of particular background for plastering should be considered in relation to its strength, suction, bonding properties, shrinkage or thermal movement characteristics, water and soluble salt content.

Thickness

Recommended thickness for Direct Coat plaster should be 12 to 15 mm and for Stucco plaster should be 6 to 8 mm. However, for higher thickness, plaster can be applied in more than one application.

Fixtures

Once the plaster has set, you can put up fixtures of varying weights. Smaller ones can be supported by using steel hooks and pins, while heavier frames and objects can be accommodated with plugs and screws, or suitable fixtures, adequately penetrated into the background to ensure a firm hold.

Maintenance:

Virtually no maintenance is required after the application of plaster.

Precautions

During application of plasters in hot and dry conditions, care should be taken to ensure that rapid loss of water is avoided. The plasters set to their full strength, provided water is mixed to the plasters in a specified ratio. If the water dries off too rapidly, then the strength of plaster will be impaired.

Packaging and Storage

Plasters are supplied in 20 kg & 25 kg HDPE laminated bags which have a shelf life of 3 months. Consignments should be used in strict rotation. To facilitate this, each bag is marked with the batch no. and date of manufacture. The bags should be stored in dry conditions.

Site Work:

Bag should be handled carefully to avoid tearing, - hooks are not recommended.
Prior to plastering, tubular service conduits should be chased into the background.
The background should be thoroughly brushed to remove dust and loose mortar.
All surfaces due for plastering should be dry, protected from the weather, and wetted 5 to 10 minutes prior to plastering, for the plaster to get a proper bonding on the background.
Ensure that hands are dry before putting them in the bag.
After taking out the required amount of plaster, always fold the open end, to protect the plaster from the moisture.
Always mix powder to water, and not water to powder.
Powder should be mixed with clean water preferably in clean plastic beckets to avoid mixing with impurities.
Dry powder should immediately be mixed to water, in order to keep the mixing time to a minimum.
Material should be thoroughly mixed, and free from lumps and impurities before use.
Once a mix has begun to set it should not be tampered with, nor should fresh gauging be mixed with the old one.