Ready Mix Cement Plaster By Shri Padmavati Agencies

Ready Mix cement Plaster

Application areas
- Brick
- Stone Walls
- AAC Block/ Concrete Block
- Concrete Surface

Comparison

Parameters                          Ready Mix Cement Plaster                           Conventional Method
Application Time                Fast Application                                             Not possible
Quality                                 Consistent quality due to computerized     Manual mixing hence not possible
                                              mixing and tested raw material                  to test every batch
Srinkage Cracks                  No shrinkage cracks                                      Significantly high shrinkage cracks
Handling & Storage            Easy handling and storage                           Difficult to keep stock of
                                                                                                                      different components
Wastage                               No wastage                                                     High wastage

Preparation & Installation
- The application surface should be rigid and free from oil, grease, paint, loose plaster or any other dirt particles.
- Dampen the wall before application of plaster
- Pour 6-7 liters of portable water in a clean container and the add 1 bag (40 kg) of Ready Mix.
- It can be mixed by hand. Use of mechanical mixer or electrical stirrer is recommended for better results.
- Mixing should be done for 5-10 minutes depending upon the speed of the mixing equipment.
- Leave the mix to slake for 5-10 min and remix before use.
- The mixture should be applied within one hour of preparation. If the concrete surface is smooth and dense. It's recommended that the surface is made rough for    better sticking of the plaster layer.
- In normal weather, doesn't need watering for the first 24 hours. After the plaster is completely dry, curing should be done 2-3 times for 2-3 days. In abnormal weather conditions, curing for 5-7 days is required.

Technical Specification

Parameter                                             Ready Mix Plaster
Appearance                                           Greyish Granular Powder
Main Binder                                          Portland Cement
Aggregate                                              Graded sand & other industrial grade mineral
Additives                                               Strength inducing polymers & water retaining chemicals
Maximum Aggregate size                    Less than 1.5 mm
Bulk Density                                          1.2- 1.6 Kg/litre unit
Compressive Strength (mpa)               More than 4 in 28 days
Coverage                                               15-20 sqft / 40 kg bag (for 10-12mm thickness)
Thickness of Layer                               6- 12 mm
Pot Life                                                  1 - 2 hours
Proportion of Water (%)                      17- 19% as per weight

Available Brand

MAGICRETE