Maxima
Price:
Get Latest Price
In Stock
Product Specifications
| Color | Red |
| Clamp Speed | 900 Mm/Sec |
| Models | Mt-500, 660, 800 |
| Injection Type | Twin Cylinder |
| Screw Ratio | 20:1 L/D |
| Control System | Closed Loop |
| Valve Type | Smart Valve |
| Features | Increased Speed, Reduced Tonnage, Greater Flexibility, Reduced Setup, Lower Operating Cost, Reduced Footprint, Improved Parallelism, Mould Protection, Even Force, Long Guided Length, Improved Alignment, Precise Control, Excellent Quality, Energy Efficient, Repeatable Cycle, Fail Safe Position |
Product Overview
Key Features
CLAMP UNIT
Over conventional 3-platen machine
- Increased performance - 50% increase in clamp speed and 80% reduction in tonnage build time.
- Greater flexibility - Longer stroke & daylight with large tie bar spacing
- Reduced setup time - No ram spacers to change - Easy access to ejector mechanism
- Lower operating cost- Reduced power consumption - 48% less hydraulic oil
- Reduced footprint by an average of 15%
- Clamp speeds upto 900 mm/sec. minimize the mould open and close time
- Fully supported strain rods that guide the moving platen. This eliminates bushing wear. Maintains platen parallelism
- Closed loop mould protect for sensitive control of mould safety.
- Rigidity in clamping due to shorter active span of tie bar and direct acting ram building tonnage in the center of the platen.
- Shorter tonnage build stroke increases seal life
- Substantial reduction in horse power due to smaller volume of oil required to build tonnage.
- Long guided length of the moving platen ensures parallelism and stability even with heavy molds
- Designed so the force is evenly distributed
across the tie bar grooves and proximity switches verify correct
closure position prior to lock - Exclusive designed hose carrier ensures that all hoses are kept from bending or crimping in a safe, smooth moving assembly
INJECTION UNIT
- Friction less linear bearing guide ways improves the injection power and cylinder alignments
- Injection units include both twin injection cylinders and twin pull-in cylinders for precise alignment
- Configurable injection velocity transfer points by percentage, volume and position for easier injection setups
- All standard screws have a 20:1 L/D ratio or higher gives good homogeneity and consistent melt quality
- 100% true closed loop injection process
- PID temperature controller with automatic PID tuning ensures temperature accuracy with all the material
TRUE CLOSED LOOP SYSTEM
It does continuous correction to match actual
velocity and pressure with set value, independent of external
influences, such as oil temperature & viscosity changes, melt
viscosity changes, etc.
- Precise injection profile control results into excellent product quality
- Precise mould filling for intricate profiles of varying cross section
- Shot weight consistency
- Better finish of article
- Delivers higher injection power for the same connected load
- Thin wall articles can be filled easily
- Energy efficient machine
SMART VALVE
- Low hysteresis - More repeatable cycle to cycle
- No mechanical feedback failures - Feedback is electric eliminating mechanical feedback failure
- Fail safe position - Eliminates hydraulic interrupt in valve stack
DESIGN FEATURES |
|
Company Details
Focusing on a customer-centric approach, Plastics Processing Machine Manufacturer Pvt Ltd has a pan-India presence and caters to a huge consumer base throughout the country. Buy Injection Moulding Machine in bulk from Plastics Processing Machine Manufacturer Pvt Ltd at Trade India quality-assured products.
Business Type
Manufacturer, Supplier
Employee Count
200
Establishment
1996
Working Days
Monday To Sunday
Certification
ISO 9001
Related Products
Injection Molding Plc Controller - Application: For Industrial Use
Price: 150000 INR
MOQ - 1 Unit/Units
Mifa Systems Pvt. Ltd.
Ahmedabad, Gujarat
Automatic Advanced Thermoplastic Injection Moulding Machine
Price: 1000000 INR
MOQ - 1 Set/Sets
Labh Projects Pvt. Ltd.
Ahmedabad, Gujarat
Injection Mould Machine - Feature: High Efficiency
MOQ - 1 Unit/Units
Laxmi Engineering Works
Ahmedabad, Gujarat
Plastic Injection Moulding Machine - 60 to 360 Ton Capacity, Stainless Steel Alloy, Orange Black Finish | PLC Control, Automatic Operation
Price: 2500000 INR
MOQ - 1 Unit/Units
Patel Plastic Machinery Mfrs.
Ahmedabad, Gujarat
Plastic Injection Moulding Machine - High Efficiency, Multicolor | Automatic, Low Noise, Smooth Running
Price: 600000 INR
MOQ - 1 Unit/Units
Kamal Engineering
Ahmedabad, Gujarat
Household Items Injection Moulding Machine - Feature: High Efficiency
MOQ - 1 Unit/Units
Sumitek Natraj Machinery Private Limited
Ahmedabad, Gujarat
Plastic Injection Moulding Machine - Color: Blue & Gray
Price: 2200000 INR
MOQ - 1 Unit/Units
Rudrax Engineering
Ahmedabad, Gujarat
50 Ton PLC Injection Mould Machine - 220-440 Volt, 1900 kg | High Efficiency for Industrial Use
Price: 850000 INR
MOQ - 1 Unit/Units
Vardhman Machinery
Ahmedabad, Gujarat
Horizontal Injection Moulding Machine - High Efficiency, Durable Components | Smooth Running, Low Noise, Easy to Operate, Reduced Maintenance
MOQ - 1 , Unit/Units
Om Enterprise
Ahmedabad, Gujarat
Injection Moulding Machine Filters - Color: White
Price: 900 INR
MOQ - 1 Piece/Pieces
Anand Filters
Ahmedabad, Gujarat
Injection Moulding Machine Anti Vibration Mounting Polybond - Application: Industrial
Price: 800 INR
MOQ - 4 Unit/Units
James Industries
Ahmedabad, Gujarat
White-Blue Automatic Plastic Injection Moulding Machine
Price: 951000 INR
MOQ - 5 Piece/Pieces
Prachi Plastic
Ahmedabad, Gujarat
More Product From This seller
Seller Details
RatingAhmedabad, Gujarat
Vice President- International Sales
Mr. Jagdish Bhandari
Address
Plot no. 93/2 & 94/1, Phase-1, G.I.D.C., Vatva, Ahmedabad, Gujarat, 382445, India
Injection Moulding Machine in Ahmedabad
Report incorrect details
