Surface Heater In Navi-mumbai

MOQ1 Piece/Pieces

ColorBlack and White

MOQ1 Piece/Pieces

TypeOther, Electric U Shape Heater

MOQ1 Piece/Pieces

ColorBrown

TypeElectric Heaters, Other

Power SourceElectric

MOQ1 Piece/Pieces

ColorSilver and Grey

TypeSS Cartridge Heater (Dia. from 32 to 80 mm), Other

Power SourceElectric

Product DescriptionStainless Steel Tubular Immersion Heaters are designed for direct contact heating of water, oils, viscous liquids, solvents, process solutions and gases. As all heat is generated within the liquid or process, virtually 100% heat transfer is achieved. Further, various options permit very tight proces

Product DescriptionInconel alloys are stronger than stainless steel at higher temperatures. They\342\200\231re also resistant to oxidation and scaling.\302\240Because of these properties some applications would require Inconel Heaters.\015\012\015\012Tristar can provide customized inconel heater to suit your applicati

Product DescriptionBobbin Heater are inserted in Tube or Casing pipe and used for indirectly heating products. These offer a large heating area to the liquid or semi-solid to be heated.\015\012\015\012Material such as oil, wax, fats and bitumen require low heater surface temperature to prevent product degradation. For

Product DescriptionSuction or Outflow Heaters are ideal for storage tanks where they are used to draw viscous liquids / oils at a pre requisite temperature. For large Tanks these heaters are installed horizontally, these can also be used to maintain the temperature of the tank by circulating the heated oil back to the

Product DescriptionElectric Outflow Heater are ideal for fuel storage tanks, they are used to draw viscous liquids / oils at a prerequisite temperature or controlled temperature. \015\012\015\012For large tanks these heaters are provided radically, these can also be used to maintain the temperature of the tank by circ

Product DescriptionImmersion heaters are used to maintain or raise the temperature of fluids in tanks or process vessels. These are installed preferably at a level below the outlet of the tank / vessel so that the heater is fully submerged in the liquid at all times. Heater capacities are determined based on the appli

Product DescriptionIncoloy Tubular Immersion Heater are specifically designed for direct contact heating of water, oils, viscous liquids, solvents, process solutions and gases.\015\012\015\012Incoloy tubular heaters are used where the application requires for better chemical compatibility then Stainless Steel. \015\01

Product DescriptionThreaded Screw plug immersion heaters consist of tubular elements brazed or welded to the plug/ tube sheet. They are screwed to a coupling welded on the tank or to the threaded opening in the tank wall. \015\012\015\012Tubular heaters are efficient as they ensure 100% of heat generated is transferre

Product DescriptionImmersion heaters are used to maintain or raise the temperature of fluids in tanks or process vessels. These are installed preferably at a level below the outlet of the tank / vessel so that the heater is fully submerged in the liquid at all times. Heater capacities are determined based on the appli

MOQ10 Box/Boxes

Supply Ability1 Per Day

Delivery Time1 Week

MOQ800 Piece/Pieces

Payment TermsCash on Delivery (COD), Western Union, Paypal

Supply Ability3-1 Per Week

Delivery Time3-7 Days