K2 Wm Proof

Highly efficient, reliable, and durable, K2 WM Proof waterproof coating is offered by us at most affordable prices and in variegated packaging materials. It is made with the usage of quality grade material and latest technology. Our K2 WM Proof waterproof coating is in complacence to industry's quality norms and standards. As a result, this is massively recommended by some of the leading consultants, developers, and architects. Application Areas:Our product is widely used in various government departments, ministries,  corporate houses, etc. Descriptions:K2 WM Proof is a high performance ready to use, cold applied, high build liquid waterproofing membrane based on polymer modified bitumen emulsion. K2 WM Proof forms a seamless, highly elastic and durable film that adheres well to most of the common substrates e.g. concrete, cement blocks, wood, existing roof felts K2 WM Proof is highly resistant to chlorides and sulphates commonly present in the soil. Benefits: Waterproofing of concrete and block founders, retaining walls, basements and wet areas such as kitchen, toilet floors and balconies.Damp proof membrane in sandwich panel constructions.Curing membrane cum protective coating for sub structureFaade damp proofing Properties: Single component, ready to useCreep resistant to temperature up to 120oC.Easy to useNon-flammable and non-toxicApplicable immediately after removal of the formworkResistant to chlorides and sulphates commonly present in the soilEnvironment friendly Typical Products Characteristics: Appearance Thyrotrophic black emulsion dries to a black flexible protective membrane Specific Gravity 1.04+/-0.01 Non- volatile content 65% Min Rubber content 10% Minimum PH 10.0 - 12.0 Drying Time 1 3 hours Full dry 3 4 days The drying time depends on the of substrate, temperature, humidity and thickness of layer, etc. Properties of Dry film: Softening point R & B (ASTM D36-84) > 120 oC. Water vapour permeability (ASTM E96 92) > 0.15gr/m2/day Elongation at break (ATSM D4.12) > 900% Recovery at 350% elongation (ASTM D412) > 50% Resistance to water (ASTM D2939) No blistering or re-emulsification Protection of buildings against ground Water As per BS 102 code of practice Curing membrane ASTM C 309: 1998 Surface Preparation All surfaces should be sound. Clean and free of contaminants. Absorbent surfaces e.g. concrete should preferably be dampened with water. In kitchens, toilets and other wet areas all the opening should be properly sealed. On all weak points such as cracks or around the pipes use a woven fiberglass mesh as reinforcement between the two coats of K2 WM proof. Application K2 WM proof can be applied by brush, roller or squeegee. Hot, dry or very porous substrate should be dampened with clean water prior to application of K2 WM proof. When two or more coats are required, ensure that the preceding coat should be dried up fully. K2 WM Proof also acts as a non-degradable curing membrane; hence it may be applied immediately after the removal of mould, to the concrete structure, which has no aesthetic value such as the sub structure of the building. Application Rate: For damp proofing/vapour barrier Apply two coats @ 250-300 grams/m2/coat Water proofing membrane Apply two costs @(approx.)1.0kg/m2/coat Curing membrane Apply two coats @ 0.4kg/m2 /coat Packing 20 Kg drum and 200 Kg Drum. Storage K2 WM Proof has shelf life of 12 months. When stored in unopened normal conditions>   Health and Safety:Use normal safety precautions. Wear rubber hand gloves, safety shoes and safety goggles while using and handling the product. Avoid contact with skin and eyes. In case of accidental contact with eyes, wash with plenty of water and seek medical treatment immediately.Material Safety Data Sheet:Important: Read this MSDS before handling and disposing of this product and pass this information on to employees, customers, and of this product.washing with water. Generic/trade Name K2 WM Proof Chemical Name Latex modified Bituminous paste membrane Composition Paste based latex fied bitumen emulsion Hazardous Ingredients Nil Appearance and colour Black thyrotrophic emulsion Usage Water proofing paste membrane Physical Properties Density Kg/M Boiling point(C) Viscosity At 20 C. Flash point(C) Auto ignition temp Flammability limits Other Solubility in water(Kg/CuM) pH Particle size(Micron) 1.05+/-0.01 > 100 2500cps NA NA NA Miscible >9 4.0 5.0 Important characteristics None Safety Hazards None Precautions None Fire Extinguishing agents Foam/ COz extinguishers Fire fighting precautions - Health Hazards Inhalation Skin Eyes Ingestion May cause dizziness on prolonged inhalation. On Prolonged contact cause irritation. Cause irritation Seek immediate medical attention First Aid In case of eye contact, or accidental swallowing, flush with plenty of water and seek medical advice immediately. Personal Protection Normal Usage spill Control/clean up. Besides using apron and safety shoes always use safety goggles and rubber gloves while handling the product spill cleanup by washing with water. Environmental Hazards None Precaution As above keep away from children Spillage mitigation(see also 15) Spillage can be collected in a continer and wash surface with shop and water. Disposal options Collect all spillage in a container and wash surface with water Storage/ shelf life/Date of Manufacturing/batch no: Printed on the drum Store in cool dry place, protected against heat/ sun. The shelf life of product is one year from the date of maufacturing provided the material is stored in unopened factory packing. Packaging & labeling 200 Kg drum & 25 Kg Drum Supplementary info. CAS NO: 8052-424 FOR ASPHAL BITUMEN