K2 Reduplast Wpa

We are a leading company, engaged in offering a supreme quality K2 Reduplast WPA, which improves the effectiveness of the water content of a concrete mix. At Higher dosages it renders effective means of reducing concrete permeability and thereby reducing water penetration.DescriptionK2 Reduplast WPA is chloride free water reducing admixture based on sugar-reduced lignosulphonates. It is a brown solution which instantly disperses in water.K2 Reduplast WPA disperses the fine particles in the concrete mix, enabling the water content of the concrete to perform effectively and improve the consistency of the concrete. This enables higher levels of workability for the same water content, facilitating water reduction and increased strengths. Benefits: Attains specified strength grades at reduced cement content or increased workability.Water reduction significantly improves compressive strengths at all ages and enhances durability through the production of low permeability concrete.Minimises the segregation and bleeding and facilities production of a dense, close textured surface, improving durability.Chloride free, safer for use in prestressed and reinforced concrete.Standard: K2 Reduplast WPA conforms to IS: 9103 - 1999 and with IS: 2645 : 2003 as an integral waterproofing compound and ASTM C494 Type A as a normal water reducing admixture.Properties:Appearance: Brown liquidSpecific gravity: 1.150-1.170 @ 25oCChloride content: Nil to IS: 456Air entrainment: Typically less then 1.5% additional air is entrained at normal dosages.Alkali content: Typically less then 5.0g Na 20 equipment / liter of admixture.Application Instructions:Compatibility: K2 Reduplast WPA is suitable for use with all types of ordinary Portland cements and cement replacement materials such as PFA, GGBFS and micro silica.Waterproofing: K2 Reduplast can be used to waterproof a concrete with the benefits of low permeability by significantly reducing the water-cement ratio.Dosing: The exact quantity of K2 Reduplast WPA should be determined by means of lab trials. The admixture should then be added to the concrete with the mixing water to obtain the best results.Curing: Good curing practice should be maintained, particularly where an overdose has occurred. Water spray, wet hessian or a curing compound should be used.Packing: K2 Reduplast WPA is available in 20 and 200 litre containers.Storage: K2 Reduplast WPA has a shelf life of 12 months at a temperature in the range of 20C to 40C.