High Pressure Foaming Machine (Hpm Series)

Main Technical Specification:-
* Type: HPM40, HPM20, HPM90/50, HPM175/90, HPM50/20, HPM20/10, HPM10
* Suitable foaming system: Rigid foam, half-rigid foam, flexible foam, integral skin foam.
* Suitable material viscosity at 22 degree Centigrade: Polyol: Max. 3500 mPa. S and Isocyanate: Max. 1500 mPa. S,
* Mixing ratio range adjustable 5: 1 ~ 1: 5
* Pouring programming time: 0.50~99.99sec
* Water supply required: Processed running water, flow capacity: 300L/min. Brings R1 " the ball valve;
* The compressed air supply required: 0.7 Mpa, flow capacity: 1000NL/min. Dry, oil-less, the dew point at 20 degrees below zero centigrade; With the1.0Mpa pressure relief valve and R3/4" the ball valve;
* The nitrogen supply required (if needs): 0.7 Mpa, flow capacity: 600NL/min. With the 1.0Mpa pressure relief valve and R3/4 the ball valve;
* Power supply required: Three phase 380V/50Hz plusmn10% or as customer's local condition
* Control voltage: AC220V/DC24V;