Common Gypsum Board Making Line

Machine introduction:
1.Paper supply system:
The special pneumatic shaft;
Magnetic powder brake;
Exact paper connection device;
High definition automatic device;
High definition automatic alignment device;

2.Mixing system:
Mainly consists of paper slurry,foaming agent,starch,water and additive etc;
All slurry has the feedback signal of level indication and chain control each batching process according to the process requirement;

3.Forming system:
This part is mainly the forming of wet gypsum board;
Can be adjusted manually;

4.Conveying system:
This part is composed of two sets solidification belt machine and one conveying roller machine.
The three machines need to run synchronically.

5.Cutting system:
Whole cut control algorithm is achieved by the separate PLC.

6.Transferring system:
This part mainly function is gypsum board acceleration conveying,overturning,transit conveying and lifting.

7.Dryer system:
Low heat consumption, heat preservation is good;

8. Finished products converying system:
This part mainly includes fast outlet,sizing and stacking which are all equipped double.

9.Fast outlet system:
Can achieve the equipment failure without stopping.

10.Sizing system:
This part consists of transverse machine,storage roller,board colse folder and sizing device.

11.Stacking system:
This part consists of two sealing machines,stackers.

12.Control center system:
Host part adopts RS VIEW as the monitoring software table to monitor the whole production process.