Laminar Air Flow Vertical Covid (19) Application: Sample Preparation

Work table top:-SS-304, PVC /Matt grit/ Sattin finish,
22 GAUGE
Front door and side covered with UV protected 5 mm
Acrylic sheet to protect
customer from UV Exposure complete transparent.
Permanent magnet to hold
Air flow type: - Horizontal Air flow from the front.
Air Flow Velocity:- 90 FPM 20%, Inflow Velocity: 0.53
m/s,Down flow Velocity: 0.33m/s
Statically balanced motor blower Assembly (Heavy
Duty), 1440 rpm, hp. Noise of the
blower is less than 55 dBA & Very low vibration
Filtration Assembly: - Room air is drawn from the
bottom of the cabinet through a
Pre- Filter, then the air pass through HEPA Filter and
spread evenly in the working area
providing a constant a stream of clean air flow within the
work area.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh onair leaving side; conforms to EU4 / G-4 Grade, with the efficiency of down to 10microns. These filters can be cleaned by compressed air & also washable.
HEPA Filteris Mini pleat type, made from water-resistant, fire retardant, importedmicro-fine glass fiber media; conforms to EU 14 Grade, with an efficiency rating better than 99.999% for 0.3 These filters are designed to accommodate higher air flovolume.
Perforated diffuser screen /shield mesh guard protect Filters from damage.
Front angular 10 degree slope helps reduce fatigue of user.
Pressure manometer to track filter pressure & air/gas cock inside the working area
Top removable panel for easy access to electrical fittings and easy removable filter