Semi Gloss Emulsion Paints

Signature Luxury Semi Gloss Emulsion Signature Luxury Semi Gloss Emulsion is a high quality acrylic copolymer based emulsion paint with low VOC, which ensures good indoor air quality. It has high wash ability, hiding power, in-can antibacterial and color retention properties. Signature Luxury Semi Gloss Emulsion also has good flow and gives a smooth, durable Semi Gloss finish. RECOMMENDED USE: For use on most interior surfaces i.e. cement plaster, stucco filler, gypsum boards, concrete, asbestos cement sheeting rendered block work. TECHNICAL INFORMATION: Solids ( % by volume) :45 + 2 Specific Gravity :1.13 - 1.23 gm/cm3 Viscosity :100 +5 K.U. Dry film thickness per coat : 40-49 microns Theoretical spreading rate : 9-11m2/ltr VOC - 0 to 12gms/lit (theoretical) APPLICATION DATA: Application Methods :Brush, make sure it is evenly spread or short-hair roller. Mixing Ratio :Single pack Thinner/Cleaner : Clean Water to be used in small quantities only for moistening and cleaning of painting tools. GUIDING DATA AIRLESS SPRAY Pressure at nozzle : 150kp/cm2- 2100 psi Nozzle tip : 0.021 A AcAca A Aca A 0.027 inch Spray angle : 65A a A A - 80A a A A SURFACE PREPARATION: The surface must be sound, clean, dry, free from dust, oil, grease and laitance etc. All traces of release agents must be removed. On chalky and dusty surfaces, all loose material must be removed by stiff bristle brushing. The temperature of the substrate should be min. 10A a A A C and min. 3A a A A C above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate.