Manual Cutting Blow Pipe - Brass Body, For Cutting Mild Steel Up To 300mm Thickness | Injector Type, Low Pressure Acetylene Compatibility, Detachable Copper Tips

Manual cutting blow pipe is a well balanced band type capable of cutting mild steel upto a thickness of 300 mm. It can be used either with dissolved Acetylene or with low pressure generated Acetylene with a suitable nozzle. It can be used with L.P.G. gas also. Its body is forged with brass, ensuring total safety. Backfire are almost completely eliminated with a specially designed injector. The joints are silver soldered. Supplied with 3/64" nozzle for cutting upto 50mm M.S. and 1/16" for cutting upto 100mm M.S. Low Pressure Blow Pipe Manual welding blow pipe L.P./L.D. is a low pressure light duty Welding Blow Pipe. It is designed for use on all lightguage sheet metal in garages and workshops. It is an injector type blow pipe which can be used either with dissolved acetylene or with low pressure generated acetylene. Provided with three detachable swaged copper tips of sizes 1,3,7 for M.S. Welding from 1.0mm to 4.00mm thickness. Suitable for Shop floor or Outdoor. Cutting - Heating - Brazing High Pressure Blow Pipe Manual welding blow pipe H.P./H.D. is a high pressure heavy duty Welding Blow Pipe. It is nicely balanced. The smooth gas controls gives sensitive flame adjustment with positive leakproof cut off. With a specially designed mixer, backfire are almost completely eliminated. Provided with six detachable swaged copper tips of sizes 2,3,7,13,25 & 30 for M.S. Welding from 1.25mm to 12mm thickness. Suitable for Shop floor or Outdoor. Cutting - Heating - Brazing