Generac Protector 50kw Automatic Standby Diesel Generator Phase: Three Phase

Condition : New
Power Output : 50kW
Type : Synchronous
Rotor Insulation Class : F
Stator Insulation Class : H
Telephone Interference Factor (TIF) : Less than 50
Alternator Output Leads 1-Phase : 3 wire
Alternator Output Leads 3-Phase : 6 wire
Bearings : Single Sealed Cartridge
Coupling : Direct, Flexible Disc
Excitation System : Direct
Voltage Regulation
Type : Electronic
Sensing : Single Phase
Regulation : A 1%
Features : Adjustable Voltage and Gain
Governor Specifications
Type : Electronic Isochronous
Steady State Regulation : A 0.25%
Electrical System
Battery Charge Alternator : 70 Amp
Static Battery Charger : 2 Amp
Recommended Battery : Group 27F, 700 CCA
System Voltage : 12 Volts
Engine Specifications
Model : In-line
Cylinders : 4
Displacement (Liters) : 3.4
Bore (in/mm) : 3.86/98
Stroke (in/mm) : 4.45/113
Compression Ratio : 18.5:1
Intake Air System : Turbocharged/Aftercooled
Cylinder Head Type : Cast Iron OHV
Piston Type : Aluminum
EPA Emissions Compliance : Emergency Stationary
Engine Lubrication System
Oil Pump Type : Gear
Oil Filter Type : Full flow spin-on cartridge
Crankcase Capacity (qt/l) : 7.4/7
Engine Cooling System
Type : Closed recovery
Water Pump : Pre-lubed, self-seating
Fan Speed (rpm) : 2029
Fan Diameter (in/mm) : 22/559
Fan Mode : Pusher
Fuel System
Fuel Type : Ultra Low Sulfur Diesel Fuel
Fuel Pump Type : Mechanical Engine Driven Gear
Injector Type : Mechanical
Fuel Supply Line (mm/in) : 7.94/0.31 (ID)
Fuel Return Line (mm/in) : 7.94/0.31(ID)
Fuel Specification : ASTM
Fuel Filtering (microns) : 10
Tank Specifications
Total Size (gallons/liters) : 62/234.7
Usable Size (gallons/liters) : 57/215.8
Run Time @ 1/2 Load (hrs) : 25