Integral Waterproofing Compound In Rajkot

MOQ100 Liter/Liters

ColorBrown

AppearanceLight brown colored liquid

Physical FormLiquid

Usagei* To get effective means of reducing concrete permeability and thereby reducing water penetration i* To improve the effectiveness of the water content of a concrete mix i* In all types of low and high rise buildings

ApplicationThe optimum dosage of PLASTCONE AW+ to meet specific requirements should always be determined by trials using the materials and conditions that will be experienced in use. This allows the optimization of admixture dosage and mix design and provides a complete assessment of the concrete mix. A starting point for such trials is to use a dosage within the normal typical range of 0.20 to 0.50 Kg /100kg of cementitious material including PFA GGBFS and micro silica.

Chemical NamePLASTCONE AW+

ColorGray

Mix RatioVariable

Packaging20kg bags

Shelf Life12 months

Specific Gravity1.1-1.3

Application MethodMixing

MOQ347 Liter/Liters

Chemical NamePolyurethane

Ph Level4.5-6.5

Purity15%

Water ContentMixed

CAS No64742-95-6

Molecular Weight5 Kilograms (kg)

MOQ75 Bottle/Bottles

FeatureGood

Physical FormLiquid

Other NamesWaterproofing Compound

ApplicationConstruction

MOQ25 Kgs/50 Kgs/ 5 Ltrs Liter/Liters

Boiling pointAbove 100AdegC

ApplicationConcrete mortar cementitious surfaces

HS Code3824

TypeWaterproofing Compound

AppearanceTransparent to slightly milky liquid

Water Contenta%0$? 20%

MOQ1 Kilograms/Kilograms

Lead Time1-2 Days

Ph Level7 aEUR" 9

AdvantageImproves water resistance flexibility adhesion crack resistance durable finish

Viscosity500 aEUR" 1200 cP @ 30AdegC

SolubilityMiscible in Water

MFPolyvinyl Acetate based

MOQ100 Kilograms/Kilograms

SurfaceSmooth

StateLiquid Coating

FeatureWaterproof

Main MaterialEpoxy

Application MethodBrush

StyleLiquid Coating

Packaging Size1-200 Liters

Packaging TypePlastic Bucket/Drum

Physical StateLiquid

ColorWhite

ApplicationWaterproofing

BrandICC LW

MOQ200 Kilograms/Kilograms

Applicationwall plastermortar

Usageas cement plasticizers

SurfaceSmooth

StateLiquid Coating

Main MaterialOther

Application MethodBrush

MOQ5 Pack/Packs

Colorwhite

ApplicationEnsure that structure is sound and free from dirt soil oil release agents laitance and any other foreign materials which may impair the bond penetration and/ or the overall performance of Hydro Coat Osmocem. In case of smooth concrete surface the surface should be water cleaned / sand blasted or acid etched to ensure that the concrete surface has an open capillary system.Ensure to fill cracks / honeycombs / holes / faulty construction joints with Dubond Acrylic Crack Filler and allow it to touch dry. Ensure to dampen surface lightly before applying Hydro Coat Osmocem to facilitate maximum chemical penetration. It must be applied with a rigid brush in fibre or with a spreader depending on the type of work required (simple waterproofing or simultaneous levelling of the substrate). Make adjustments to the mixing water in order to obtain a consistency suitable for the required application.In case of highly porous damaged efflorescence substrate it is recommanded to use Hydroprime as a first coat to facilitate the maximum chemical penetration.Add 4 aEUR" 4.5 Ltrs of water with 10 Kgs of Hydro Coat osmocem stir the mix thoroughly to form slurry and apply in specified quantities by stiff bristle brush or squeegee. Ensure to prepare only as much amount of slurry as can be applied during its pot time i.e. 20 minutes. ( can add or reduce water as per the site conditions )Ensure the desired thickness in each coat of application. Apply the first coat on a substrate moistened to saturation point but without the presence of stagnant water. Once the product has hardened apply a second coat (normally 4-6 hours depending on climatic conditions and the degree of absorbency of the substrate. In any case do not apply the second coat after a period of 24 hours). Apply the second coat in a criss-cross direction as compared with the first coat. The layers of hydro coat Osmocem must be applied with great care to ensure complete coverage of surfaces and proper connection of the walls and horizontal surfaces by means of connection shells.For horizontal surface apply in one coat while for vertical surface apply in two coats. Apply second coat when first coat is touchdry. Glass fiber mesh can be used as a sandwitch between the layers of coat as reinforcement system which ensures tight bonding to restrain from the hydrostatic preassure. Light spray of water may be required between coats in hot/ dry climates.In extreme hot weather and very low humidity conditions ensure curing as soon as the Hydro Coat Osmocem coating has hardened sufficiently. After 36 aEUR" 48 hours of the application of 2 coats ponding can be done to the satisfaction of the engineer for the final testing of waterproofing. Recommended for 3 to 4 days.

Physical StatePowder

MOQ1 Liter/Liters

TypeOther

MaterialWATERPROOFING ADMIXTURE

Base MaterialLigno Sulphonates

AppearanceBrown Liquid

SolubilityWater Dispersible

Packaging1kg-225kg

Dosage140-280g/50kg Cement

ApplicationConcrete & Plaster