Wheel Tracking - Robust Aluminum Alloy Frame, 400 X 390 Mm Table, Adjustable Load From 520n To 700n | Continuous Rut Depth Measurement, Real-time Data Display

Wheel Tracking
Specification:
The machine fully satisfies both EN 12697-22 and BS 598:110 Specifications
Travel of the table : 230 /- 5 mm
Table cycle frequency : adjustable 15 to 40 cycles per minute
Hard rubber tyred wheel having outside diameter 200 mm
Wheel load on the sample : 700N /-10N (EN 12697-22) or 520N (BS598:110). The load is applied on the sample through a lever
The effective load applied on the sample adjusted by micrometrical weights positioning
Continuous real time rut depth measurement (penetration of the wheel into the sample) through a linear transducer 40 mm travel by 0, 01 mm accuracy.
The test frame is made of robust aluminum alloy and it is contained in a climatic cabinet with adjustable temperature from 30 to 65C. /- 1.0C.
The cabinet is equipped with two doors with insulated glass for inspection
The sample table has dimensions: 400 x 390 mm and can accept rectangular slabs of
several sizes:
305 x 305 mm, 50 or 100 mm high
305 x 400 mm, 50 or 100 mm high
200 mm dia. core samples, 50 mm high
The sample confinement frames are not included and ordered separately (see accessories)

Also accepts samples with dimensions up to 400 x 500 mm, 180 mm high
The machine is supplied complete with adaptors for a correct mould positioning and locking
The wheel tracker is equipped with 3 temperature probes
1 Probe, connected to the thermo regulator, for the control and adjustment of the cabinet temperature
2 Probes for temperature measurement inside the specimen

Hardware:
Data acquisition and processing system fully managed by microprocessor
Multi functions keyboard with encoder for easy and rapid setup
Large graphic display 320 X 240 pixel
RS 232 port for connection to PC
Firmware:
The multilingual testing firmware allows
Management and automatic control of machine and test
Setup of all test parameters
Test data acquisition and processing
Real time display of: number of cycles, rut depth, temperatures. Real time cycle rate will also be displayed when using a serial connection to PC
Calibration menu for setting and checking all test data
From the control board, it is possible to select parameters, set data acquisition and processing according to EN and BS test procedures, with Identification data of the sample (slab) under test
Cycle frequency
Number of passes to end the test
Max rut depth to end the test
Sampling frequency of the rut depth
Testing temperature
Sample (slab) thickness
The use of the B038 Wheel Tracker requires connection to a PC with Windows 98, 2000, XP minimum requirements.
Power supply: 230 V 50/60 Hz 1 ph 2200 W
Power rating of the table : 500 W
Dimensions: 1580 x 650 X H 1790 mm
Weight: 400 kg approx