Solar System For Heater And Light Capacity: 1 Kw Kg/hr

Capacity of Tanks : 500 LPD
Type : Non pressurized system
Inner tank Material : 1.5 mm GI( Galvanized iron) with special salt water protection coating
Inner Tank size : 485 mm dia 3000mm length
PUF : 50 mm
Outer tank size : 585 mm size length 3050 mm
Outer Cladding : PPGI (Pre painted galvanized iron)
Back up heater : 2 kw x 1 noa s with thermostat control 230 v Ac (Optional)
Tank support : MS powder coated angle
Tank Testing : Factory pressure tested for normal systems is at 1 kg/cm2
Outer Tube Diameter : 58A 0.5 mm
Inner Tube Diameter : 47A 0.5 mm
Tube length : 2100 mm
Number of tubes : 35 Nos
Type of tube selective coating : Graded AI-Ni with copper under coating
Tube in Tank seal : Made of silicon rubber
Other rubber parts : EPDM
Configuration of glass tubes : Two concentric Boro-silicate glass tube absorptance >93% emittance<6% (@85A c)
Area Required : North-South=2.3m East-West=3.3 m

Item of DescriptionProduct Rating
Solar PV module : 325 Wp 24 V
Solar Dual MPPT Inverter : UTL 1 KW
Solar ACID Battery : 150 Ah 12 V-6 LMS
Solar Cable : 6mm (90 mtr) & 25mm (4 mtr)
Mounting structure : 32 mm square pipe Nut & Bolt
DC MCB : 63 amps550 V -DP C10 & 125 amps 250 V-SP C10
DC SPD : 2P 20-40 kA 600 V DC SPD C10
AC MCB : 63 amps
AC SPD : 2P AC SPD-phase
DB BOX : 8 way
Earthing protection set : Earthing Pit Char coal salt spike rod
Solar Electric other Access : MC4 & T connector changeover Lug Cable Tie C-clamp
CIVIL work : Brick cement sand chips Civil Labour
Handling & Freight Charges : Mechanic