Radar System For Speed Measurement And Checkpoint

Following are the Main Features of EP-800VII Radar System For Speed Measurement And Checkpoint:-
1. Adjust the antenna direction of radar speed detector to ensure the cover scope to ABCD in the front picture, should make the carriageways brings reflected signals can be reduced as weak, and can reduce the erection height, so the antenna zone can effectively shield off the coincidental vehicles, and can realize ideally the sensitization to overtake way only.
2. Adjust the focal length of integrated camera to ensure the shooting scope to cover the ABCD
3. The choice of ABCD regional, basically should ensure integrated camera obtained image can contain the enough evidence information, namely clear license plates, the complete vehicle photos, etc.
4. When the target vehicle drive into the ABCD area, images can real time be returned to industrial computer, and them will be collection by camera capture and real time digitalize.
5. The whole system takes industrial PC and radar detector as the core, it will be the compound speeding information existed in industrial PC, depending on the transmission requirements ,can use a variety of ways, such as artificial acquisition or network upload for providing law enforcement basis to public security traffic management departments.

System references:
(1) highway or ordinary highway monitoring
(2) Detection speed 5-200KM/H
(3) Surveillance lane width:1-3 lanes
(4) Shooting distance: 5-40M