Ppgi Color Coated Steel Coil - Hot Dipped Galvanized, 0.18 To 0.8mm Thickness, All Ral Colors, Corrosion Resistant Paint System

FOLLOWING SPECIFICATION OF PPGI COLOR COATED STEEL COIL :

STANDARD: SGCC, JIS, G3312, GB/T1275, EN
BASE MATERIAL: HOT DIPPED GALVANIZED STEEL COIL
PAINT COATING: NORMAL POLYESTER COATING, FLUOROCARBON COATING AND SILICON MODIFIED COATING
THICKNESS: 0.18 TO 0.8MM
SIZE WIDTH: 800/914/1,220/1,250/1,219MM (USUAL: 1,000 TO 1,200MM)
ZINC COAT: 80G TO 180G
COLOR: ALL RAL COLORS TO YOUR DEMANDS
ID AND WEIGHT: 508MM, 3 TO 5T
YOUR DETAILED INQUIRY WILL BE HIGHLY APPRECIATED, WE ARE LOOKING FORWARD TO YOUR REPLY
PRODUCT DESCRIPTION:
PRE-PAINTED GALVANIZED STEEL COIL: PAINT SYSTEM CONSISTS OF A STEEL SUBSTRATE TO WHICH A SUPER POLYESTER PRE-PAINTED FINISH SYSTEM IS APPLIED
THE SYSTEM IS DESIGNED TO PROVIDE PROTECTION AGAINST CORROSION IN AREAS WHERE SEVERE TO VERY SEVERE ENVIRONMENTAL CONDITIONS ARE EXPERIENCED
PRE-PAINTED STEEL PRODUCT IS SUITABLE FOR A WIDE RANGE OF ROLL-FORMED ROOF AND WALL CLADDINGS, RAINWATER ACCESSORIES AND GENERAL BUILDING PRODUCTS
COMPOSITION:
FOLLOWING PRETREATMENT, A CORROSION INHIBITIVE PRIMER, AND TOP COAT IS APPLIED TO THE OUTER SURFACE AND A CORROSION INHIBITIVE PRIMER AND A BACKER TO THE REVERSE SIDE
THESE COATINGS ARE OVEN CURED TO PROVIDE COLOR AND CORROSION PERFORMANCE
GI PRODUCT DESCRIPTION:
STANDARD: JIS, G3302, SGCC, ASTM, A653M-04 EN 10142 DX51D, GB/T2518
SIZE THICKNESS: 0.18 TO 0.8MM
WIDTH: 914 TO 1,250MM
ZINC COAT:50 TO 100G OR 40 TO 80G
SURFACE TREATMENT: MINI/REGULAR/BIG/ZERO SPANGLE/CHROMATE