Polymer Adhesive Glue (Epoxy) Application: Widely Used For Installation Of Ceramic To Metal With Temperature Lower Than 150A

We are involved in exporting of Polymer Adhesive Glue (Epoxy) in Zibo Shandong Sheng China.

Introduction:

Widely used for installation of ceramic to metal with temperature lower than 150a for example the coal transferring system powder preparing system Ash removal system dust extraction system in the power plant as well as the material transit system material mixing system hopper storage bin pipe bend and ball mill.

Advantages:

(1) Less smell fast solidifying in room temperature high cohesive strength.
(2) High cohesive strength excellent thixotropic propertyNon-flowing applying in temperature from -60 to +150a a
Technical Data Sheet:
Item
TDS of 8080-1
TDS of 8100
status
White Pasty
White/yellowish Pasty
Ratio of mixing gluei by weighti
A:B=4:1
A:B=1:1
Density i g/ cm3i
1.28
1.4
Operation Timei min/25a i
30
30
Shear Strengthi Mpai
25.2
20
Tensile Strengthi Mpai
65.0
65.0
Solidifying Condition i 25a i
24h
24h
Working Temperaturei a
-60i 150
-60i 150

Instruction of application:

(1)Cleaning and polishing the area where need to use glue including the greasy dirt dust rust etc. Washing the surface by Acetone or acetic ether and then dry properly.
(2) Mix A and B by standard ratio by the weight standard. Mixture should be sired uniformly. Putting the mixed glue on the surface where need to be pasted then connect those two part immediately and give pressure at the same time. After 8-10 hours the strength can reach the structural strength then the connected parts an be removable.
(3) The workable time is 30 minutes after mixing the glue at temperature 25a .
(4) Do not mix too much glue each time and the mixture should be used immediately. The gel time is related to the temperature as well the higher temperature the shorter of gel time.
(5) Avoid touch skin eyes etc. In case touch onto skin should clean by soap finally clean by water. In case touch into eyes should clean by the water immediately and ask help from hospital.

Package Storage & Transportation:
(1) For type 8080-1: 5kg/seti 20kg/carton;
For type 8100 10kg/seti 25kg/carton(A and B are packed separatelyi
(2) Should be stored into cool ventilated place Storing period is 2 years.
(3)Dangerous cargo transportation as per general chemical standard.

Useful Information:
All related information mentioned is reliable However Due to the using conditions and method are out of our control this instruction can not replace the necessary testing from the end user to ensure the performance of our product.
For more information please contact our customer service sector.