Glass Adhesive

MOQ1 Bottle/Bottles

Shelf Life15 Days

Packaging Size50 mL Duo-Pak Cartridge

Adhesive TypeOther

Storage Temperature16 C to 27 C Celsius (oC)

HardnessShore D 75 80

Tensile Strength~31 MPa Megapascals (MPa )

MOQ10 Piece/Pieces

Usage & ApplicationsHome, Office, Commercial Buildings, Bathrooms

Operation TypeManual (press-fit and stick)

Thickness6 mm - 12 mm (suitable for standard glass door panel thicknesses)

Width10 mm (approximate)

Surface FinishGlossy/Transparent

Weather ResistanceYes

MOQ10 Roll/Rolls

ColorTransparent

Product TypeSealing Tapes

MaterialOther, FRP

AdhesiveRubber

Adhesive SideSingle Sided

Width75 Millimeter (mm)

MOQ1 Kilograms/Kilograms

ShapeRound

Usagewater, rain water catchment for in-home use

Product TypeGlass Thassos

Weight1 Kilograms (kg)

ColorSilver

MOQ10 Bag/Bags

Shelf Life12 Months

Packaging Size20 Kg

Surface Of ApplicationMetal

ColorWhite

Storage Temperature4 Degree to 45 Degree Celsius (oC)

GradeIndustrial Grade

MaterialPolyurethane

Dimensions10x2cm

ViscosityMedium

Cure time30min

Shelf life2years

ApplicationSyringe

Chemical TypeBonding Glue

Packaging TypeBox

Packaging Size100ml

Material CompatibilityGlass

Temperature Resistance100

Chemical ResistanceAutomotive Fluids

MOQ150 Kilograms/Kilograms

Adhesive TypeSolvent Adhesive

Glue thickness6 Millimeter (mm)

Storage Temperature30-35 Celsius (oC)

MaterialOther

UsageConstruction

GradeA

MOQ500 Kilograms/Kilograms

UsageFor Ceramic and Glass Fixing Purpose

TypeMosaic Adhesive

GradeIndustrial Grade

Physical FormPowder

EINECS No12004-1997

ColorWhite and Gray, Other

Product CodeAVS 503

ColorGrey

Pack Size20kg & 50kg

Surface PrepLevel,Clean

Suitable forInterior/Exterior

ApplicationCement,Concrete

MaterialPolymer-cement

Pot Life24 hours

Coverage10 sq ft/kg

Open Time30 minutes

Application MethodTrowel

Setting Time2 hours

MOQAs per market demand Kilograms/Kilograms

MaterialOther

Adhesive TypeWater Activated

UsagePacking, Other

ApplicationPet & Glass Bottle Labeling Adhesive for Liquor and Beverage Industry.

ColorTransparent Milky White

Physical StateLiquid

MOQ4 bags Bag/Bags

ColorWhite

TypeGlass Mosaic Tile Adhesive

Physical FormPowder

Application1. Power should be applied with a suitable toothed spreader, to be chosen according to the size andcharacteristics of the rear surface of the tiles. It is best to use the smooth part of the trowel to spreada fine initial layer, pressing down hard so as to obtain maximum adhesion to the substrate and toregulate water absorption, after which the thickness can be adjusted as required by tilting thespreader at an angle.2. Spread the adhesive over a surface area which will allow for laying of the covering materials within the indicated open time, and check for suitability of the adhesive at regular intervals. The open time may vary considerably even during the application, depending on various factors such as exposure to sunlight, air currents, absorbency of the substrate, temperature and relative humidity of the atmosphere.3. Press down each tile to allow for complete, uniform contact with the adhesive. In the case of laying in environments subject to heavy traffic, in outdoor locations, on underfloor heating systems or with materials4. In general, ceramic tiles do not require preliminary treatment, however these materials should be checked to ensure they are free from traces of residual dust or materials not properly anchored to the surface.

Chemical NameConstruction Chemical

ColorBlue

MaterialPlastic

Weight25kg

Volume20L

Pot life24 hours

Coverage10 sqm

Product TypeTile Adhesives

MaterialCement based

Packaging22kg bag

Coverage6-6.5 sqm

ApplicationInterior/Exterior

Setting Time24 hours

ColorGray

Pot life2-3 hours

Coverage10 sq ft

Adhesion strengthHigh

MaterialPolymer based

Application MethodTrowel