Oil Press Machine - 600w Food Grade Stainless Steel, 415x170x300mm Dimensions, Efficient 4-8kg/hr Oil Extraction Capacity, Multi-seed Compatibility, Easy Operation And Cleaning

Multi-functional Home Oil Press Machine for Pressing like Peanuts, Coconut, Sesame, Soybean, Walnuts, Sunflowers seeds, Vegetable seeds, Flax seeds, Almond, Castor Seeds, Mustard seeds, and so on.
Machine Motor is an industry motor that can continue working for more than 4 hours. We suggest it works for 4 hours and take a rest for about 1 hour. That will be good for machines.
Oil extraction is up to 45%, which depends on the oil seed.
Easy to operate, clean, move, and store.
Working Capacity:-
(Take a few Examples of Seeds just for reference)
MaterialEfficiencyOil Yield
Peanut4 kg/hr1.8 kg/hr
Sesame6 kg/hr3 kg/hr
Sunflower seeds4 kg/hr1.8 kg/hr
Walnut4.5 kg/hr2.1 kg/hr

Working Process:-
Turn on the heating switch and wait for matching the temperature as shown in Green Digit.
When Green Digit and Red Digit Match then start the machine.
Directly put dry ingredients.
Press the A Squeezing switch and start pressing the oil.
After pressing ends, hold (don'A t loosen) the A CleanupA switch for more than 20 seconds, and it will be easier to remove the screw and then clean, If you don'A t press the cleanup switch when pressing chamber becomes cold, the interior residual slag harden and pressing rod will be blocked in the pressing chamber and cannot be taken out for cleaning.
In case of power out it during the process, please turn off the start switch, and unplug the power plug at the same time, continue to press after turning on the heating switch for more than 10 minutes when power is connected.
Clean: remove the pressing chamber and clean it with edible detergent and water.
Pull out the power plug and store the machine in a dry place.
The pressed oil will automatically separate after storing for a night under room temperature 15 degrees above and does not need to filter.
In the process, sometimes material from the aerial state in the feeding port because raw materials are damp, or the surface is not smooth, you can gently touch the raw materials.
Notice: Never put a finger or hard objects such as a metal bar into the entrance to the chamber to stir raw materials.