Blue And Red Mould Rubber Rtv

Mould Rubber RTV Application : including making molds for reproducing prototypes furniture sculpture architectural elements with a variety of materials including wax gypsum low melt alloys/metals and urethane epoxy or polyester resins

Preparing the Model: Porous surfaces such as wood should be dried and sealed. Also applying a release agent such as petroleum jelly will aid in easy release of a silicone mold. Because silicone can sometimes bond to surfaces which contain silica such as glass cements and natural stone; it is recommended to do a spot test for possible adhesion.

Mixing and Curing: This material can readily accept pigments.Stirring individual components before use is recommended. Make sure to weigh and measure accurately. Close containers tightly after use. Products should be stored in their original sealed containers in an environment that does not exceed 90F. Under these conditions the product will achieve the expected shelf life. Please refer to the individual products technical sheet to determine the products expected shelf life.

The following procedure is an example of a 100:2 mix ratio addition cure product. Please refer to the producta s technical sheet for mix ratio information:

Mixing: Charge 100 parts by weight of a Part Aa and 2 parts by weight of a Part Ba into a clean compatible metal or plastic container. The volume of the container should be 3-4 times the volume of the material to be mixed.