Model-4cts-4 Channel 4-20ma Input Scanner Display - Automation Grade: Automatic

Model 4CTS is a unique instrument which accepts upto four, 4-20mA signals from three wire transmitters or sensors. It allows scaling of the display from a large variety of ranges and resolutions as permitted by the 4 digit LED display. It displays a scaled parameter reading and channel number and units. It provides two alarms and one Fault alarm with corresponding relay contacts. A Tower Lamp can be connected for area annunciation visibility of status. Sensors are user provided.

STANDARD SPECIFICATIONS
Channels: Upto four
Display: 4 digit LED 10mm high
Ranges: 0-2 , 0-5, 0-10, 0-20, 0-25, 0- 0 - 50, 0 -100, 0 - 200, 0 - 500, 0 - 1000, 0 - 1500, 0 - 1000, 0 2000.
Resolution: No DP, 000.0, 00.00, 0.000
Linearity: +0.5 %
Power: 110 to 220VAC 50 Hz 1 A
Power Supply: 24 VDC to transmitter
Current out: Maximum 250mA per sensor
Input Load : 100 Ohms resistance
Alarm: Two visual alarms, user settable throughout the range
Alarm Relay: One C-NO OR C-NC contact of 50VA rating provided for each set-point
Working Temp: 0 to 45C
MOC : ABS with transparent cover
Size:160 x 160 x 130 mm deep
Weight: 800 gms
IP rating: IP54
Communication: For connection to RS485 Modbus RTU PLC /SCADA
Tower lamp: 3 lights ( Red , Yellow & Green) and buzzer.