Indoor Cpe 4g Lte Wifi Router With 2 Ethernet Port

About Indoor CPE 4G LTE WiFi router with 2 Ethernet Port :
Indoor CPE 4G LTE WiFi router with 2 Ethernet PortIndoor CPE 4G LTE WiFi router with 2 Ethernet PortIndoor CPE 4G LTE WiFi router with 2 Ethernet Port
Indoor CPE 4G LTE WiFi router with 2 Ethernet Port
B260 specification parameter
Motherboard chip : Chip solution
Memory flash
Power amplifier chip
Antenna specification : Omnidirectional antenna
rate : 2.4Ghz:300Mbps
LTE Cat4 : 150Mbps(DL MAX)50Mbps(UL MAX)
Physicalinterface : 2pcs10/100 LAN AJ45port support DC24V POE power supply;
1RESET reset button
1micro USB port (support DC5V 2.5A power supply
1micro SIM card slot
Indicator light : power /WAN/LAN/WIFI/4G/3 signal intensity lights
power : power supply : 2.4POEpower supply(100m)/USBport power supply;
Power Adapter : 24V0.5A Power Adapter
Power consumption : <12W
Protection level : IP66 level
Mounting method : Pole-mounted installation, Wall mounting, Bracket mounting
Product Size : Dimensions : 353*85*44mm
Using environment Working temperature : -10~55
storage temperature : -40~70
Working humidity, no condensation : 10%~90%RH noncondensing
Storage temperature, no condensation : 5%-95%RH noncondensing

4G Router B260 (support SMS function)
1. The drop And Recharge Function :
Network disconnection self-test repair function: When the device is off the public network, it will be detected every 2 minutes, and it will automatically reconnect to the registration dial (if the SIM card has no traffic, it will automatically detect the dial without manual restart after the SIM card recharged)

2. Networking Mode Selection :
2:1 automatic networking mode (in the automatic networking mode, if wifi and 4G exist at the same time, it will automatically set up the wifi network priority. If it detects that the wifi network does not go to the Internet, it will automatically connect to the 4G network)
2:2 3G/4G mode: fixed 3G/4G Internet access
2:3 wifi mode: You can choose the wifi account and enter the password, it will automatically connect to the Internet on the wifi network.
3. SSID can be set to be hidden or enabled, and the SSID name password can be modified.
4. Relay function (INTERNET WIFI) function, this function is when external WIFI Internet access, and directly use external WIFI to access the Internet, then it will not use 4G network.