H355(a) Series Intelligent Addressable Thermal (Heat) Detectors

We are manufacturing and supplying huge range of H355(A) Series Intelligent Addressable Thermal (Heat) Detectors from Chennai, Tamil Nadu, India.


FEATURES

SLC Loop:

Two-wire SLC loop connection.
Unit uses base for wiring
Addressable by device.
Direct Decade 01 a 159 (MS-9600), or 01 a 99 (MS-9200UD) entry of address.
Architecture:

Sleek, low-profile, stylish design.
State-of-the-art thermistor technology for fast response.
Integral communications and built-in device-type identification.
Built-in tamper resistant feature.
Built-in functional test switch activated by external magnet.
Operation:

Factory preset at 135A F (57A C).
Rate-of-rise model (H355R), 15A F (8.3A C) per minute.
360A -field viewing angle of the visual alarm indicators (two bicolor LEDs). LEDs blink green in Normal condition and turn on steady red in Alarm.
Visible LEDs a blinka every time the unit is addressed.
SPECIFICATIONS

Diameter: 6.1" (15.5 cm) installed in B350LP.

Height: 2.1" (5.33 cm).

Weight: 4.8 oz. (137 g).

Installation temperature: a 4A F to 100A F (a 20A C to 38A C).

Humidity range: 10% to 93% relative humidity (non-condensing).

Voltage range: 15 to 32 VDC peak.

Standby current: 300 I A @ 24 VDC (one communication every 5 seconds with LED blink enabled).

LED current: 6.5 mA @ 24 VDC.

Mounting: B350LP flanged base, included.

Fixed-temperature setpoint: 135A F (57A C).

Rate-of-rise detection: responds to greater than 15A F/ 8.3A C per minute.

Recommended spacing: 50' (15.24 cm)