Grs Graver Max Double Ended Graver Tool

Our GRS Graver Max Double Ended Graver Tools are available with following technical specifications :
Voltage: 220V,50/60Hz
Power: 60W
Air Pressure : 0~3kg/c
Rotate Speed : 100~4000RPM
Diameter : 260x210x250mm
Packing Size : 315x27x25mm
Weight : 8kg
Accessories : Handpieces 2PCS,Foot Control 1PC,Cable 1PC.

OPERATION:
1.Shut down the switch of AIR PRESSURE CONTROL KNOB & AUXILIARY AIR OPEN / CLOSE.
KNOB FOR OUTLET BELOW to avoid the damage of pressure gauge and reducing valve due to
strong air pressure.
2. After connecting all accessories with the machine, turn on the power .(The indicator light is shine )
3. Put the ON/OFF Switch to Position (1) or (2).
4. Adjust the air pressure and the rotate speed , hold the handpiece like a table knife, step on the foot control to max ,adjust AIR PRESSURE CONTROL KNOB slowly to the gauge show 1.5-2kg/cmA , meanwhile adjust the STROKES PER MINUTE SELECTOR KNOB , in order to make the impact of handpiece No.1 reach the maximum., then press the AIR PRESSURE CONTROL KNOB.
5. Loose the foot control , the graver handpieces stop working , intall the graver tools into the handpiece.
6. Turn the HANDPIECE SELECTOR KNOB to Switch Handpiece No.1 & No.2 .
7. When you using Hnadpiece No.2 a rotate handpiece , shut off the power , turn on AUXILIARY AIR
OPEN / CLOSE.KNOB FOR OUTLET BELOW to adjust AIR PRESSURE CONTROL KNOB.
8. Step on the foot pedal to control impact.