Green Yellow Heat Shrinking Sleeve Application: Foundry

Keeping track with the ever growing market requirements, we are betrothed in offering a superior quality range of Green Yellow Heat Shrinking Sleeve. Offered in varied specifications in order to meet the needs of our clients, the offered product is fabricated using unmatched quality raw materials with high precision by our vendors in accordance with the international standards. These Green Yellow Heat Shrinking Sleeve  is tested on defined parameters to ensure quality. Clients can aviail this sleeve from us at reasonable prices. Technical Details Test Item Test Method Typical Value Tensile strength ASTM D2671 >10.4MPa Breakdown elongation ASTM D2671 >400% Tensile strength after aging ASTM D2671 (136 oC for 168 hrs) >10.4MPa Breakdown elongation after aging ASTM D2671 (136 oC for 168 hrs) >350% Flame retardant UL 224 VW - 1 Heat Shock ASTM D2671 (200 oC for 4 hrs) No drop/ no flow out layer Dielectric Strength ASTM D2671, at 250V AC for 60seconds > 15k V/mm Low temperature flexibility ASTM D2671 (-40 oC for 4 hrs) No cracking Water absorption ASTM D570 <0.5% Product Selection Product Code Internal Diameter Before Shrink/ After Shrink Standard Length (m/roll) (mm) (inch) Single Wall Heat Shrink Ratio 2:1 S11-2/1 2.0/1.0 0.079/0.039 200 S11-3/1.5 3.0/1.5 0.118/0.059 200 S11-4/2 4.0/2.0 0.157/0.079 100 S11-5/2.5 5.0/2.5 0.197/0.098 100 S11-6/3 6.0/3.0 0.236/0.118 100 S11-8/4 8.0/4.0 0.315/0.157 100 S11-10/5 10.0/5.0 0.394/0.197 100 S11-12/6 12.0/6.0 0.472/0.236 100 S11-16/8 16.0/8.0 0.630/0.315 100 S11-18/9 18.0/9.0 0.709/0.354 100 S11-20/10 20.0/10.0 0.787/0.94 100 S11-25/12.5 25.0/12.5 0984/0.492 100 S11-30/15 30.0/15.0 1.18/0.591 50 S11-35/17.5 35.0/17.5 1.378/0689 50 S11-40/20 40.0/20.0 1.576/0.787 50 S11-50/25 50.0/25.0 1.969/0.984 25 S11-60/30 60.0/30.0 2.362/1.181 25 S11-70/.5 70.0/35.0 2766/1.378 25 S11-80/40 80.4/40.0 3.150/1.575 25 S11-100/50 100.0/50.0 3.937/1.969 25 Product Code Internal Diameter Before Shrink/After Shrink Standard Length(m/roll) (mm) (inch) Single wall heat shrink ratio 3:1 S11-3/1 3.0/1.0 0.118/0.039 200 S11-6/2 6.0/2.0 0.236/0.079 100 S11-9/3 9.0/3.0 0.354/0.118 100 S11-12/4 12.0/4.0 0.472/0.157 100 S11-18/6 18.0/6.0 0.709/0.236 100 S11-24/8 24.0/8.0 0.945/0.315 50 S11-39/13 39.0/13.0 1.535/0.512 50 Dual wall(with adhesive inside) Heat Shrink Ratio 3:1 S11-12/4 12.0/4.0 0.472/0.157 1.25 S11-18/6 18.0/6.0 0.709/0.236 1.25 S11-24/8 24.0/8.0 0.945/0.315 1.25 S11-39/13 39.0/13.0 1.535/0.512 1.25