Fine Wet Wire Drawing Machine Model 17/170

Keeping in mind ever-evolving requirements of our respected clients we are manufacturing and exporting a wide range of Fine Wet Wire Drawing Machine Model 17/170. Clients can purchase these products from us at very nominal rates.

Machine typeL17/170
Max inlet(mm)0.8 mm
min outlet(mm)0.08 mm
Max speed(mpm) 720
Number of drawing die17
Slip ratio of m/c13%
Fix speed capstan slip ratio10%
CapstanTungsten
Max inlet tensile strength750MPa
Motor power2.2~5.5(kw) AC
Spooler power1.5~3(kw) AC
Power supply380V/50HZ/3Phase
PLCINOVANCE
Dimention(L*W*H)7000*1500*1500
Drawing MaterialStanless steel
Lube box volume200L
Noise 85dB

The frame structure of the drawing machine is formed by welding square tubes and steel plates. The rack is built in sections and will be connected and integrated during field installation and because of its firm structure and good rigidity the machine can meet the heavy load and high-speed drawing. All the raw materials of the structural components (such as steel I-shaped steel angle steel etc.) must not have surface corrosion of which the depth exceeds 0.3mm; Thick hot rolled plates are applied to the machine base deck plates and vertical plates while the inside of the cavity reinforced by using the thick steel plates; The surface of the steel plates and sections shall be treated by rust removalrelieving of internal stress on the components after welding shall be done before machining in order to ensure the stability and rigidity of frame structure meet the requirements of high-speed drawing and to ensure that no vibration will appear at high speed or in heavy load state.