Encoder Repeater

The Q-LOG Controls And Systems company is offering a wide range of Encoder Repeater. Our products are highly demanded due to its smooth performance and fine finishing. All the products are made under the instructions of our skilled professionals, by using the top quality material. Furthermore, we are supplying the range of Encoder Repeater at affordable prices. Features : DIN rail mountable Three (A,B,Z) outputs module or Six (A,a ,B,BI , Z,ZI ) outputs module LED indication for output signals Reduces high frequency noise and gives clear square wave Technical Specifications Continuous power dissipation at (or below) 25A C free-air temperature: 200mW Input signal voltage:5 VDC-30 VDC, Typical voltage is 5VDC Input to output electrical isolation: 3.55 KV Max pulse frequency: 125 KHz Max. input current:10 mA @24VDC Max. load per output point:50 mA Max. output voltage:65 VDC Max. Voltage drop in output voltage: 0.5 V @ 5mA load Min.output voltage:2.0 VDC Resistance, input to output: 100 Ga Applications For connecting simulated encoder signals from inverters/Servo drives to PLC inputs To convert RS422 signal in to single ended signal To shift level of the square wave input to desired level Available in 3 points / 6 points output variants Opto. boards with input signal other than 24VDC can be supplied on demand Max. frequency:125 KHz Standards /Approvals CE Certified Optoisolator:UL PCB:IEC61373 Profile & end plates:CE Terminals:UL/CEEncoder Repeater :-To extend encoder cables to far distance encoder repeater is a best option available. Also,voltage level of signals received from encoder can be changed with use of this module e.g. 24 VDC pulses can be converted to 5VDC pulses. HTL to TTL and TTL to HTL conversion is also possible using this module.Output is open collector push pull and maximum pulse freq. is 125 KHz.Differential to single ended converter (HTL to TTL converter):-This converter converts differential signals from encoder / Servo drive into single ended signals e.g. 5 VDC differential signal from a servo drive is converted into 24 VDC single ended signal. The output can be from 5VDC to 30 VDC.The repeater also filters RF noise. Pulse train frequency can be up to 125 KHz.Sink and source types are available.