Cnc Wax Seal Stamp Engraving Copper Machine

We are engaged in manufacturing and distributing of CNC Wax Seal Stamp Engraving Copper Machine in Shijiazhuang, Hebei, China.

CNC3030F wax seal stamp engraving copper machine main parameters:

a Mechanical parta

1. Dimension: 690mm A 700mm A 750mm (L A W A H)
2. Worktable size: 395X550 A 20mm (length A width A thickness)
3. Rack material: the whole wax seal stamp engraving copper machine for the 6061 aluminum alloy through the import CNC machining center precision machining, panel for the CNC processing T-slot aluminum tiles,
Surface all anodized. Non-market surface of the general processing of ordinary aluminum or aluminum, castings comparable.
4. Effective travel: X axis 280mm Y axis 280mm Z axis 100mm
5. Maximum workpiece thickness: a 110mm (Z-axis bottom and table spacing)
6. Slide unit: Taiwan imported X axis Y axis Z axis I 20 square rail
7. Transmission unit: three-axis use of new Taiwan imported TBI 1605 ball screw, nut
8. Rotary shaft four-axis (optional): reduction ratio 1: Standard three-jaw chuck, but also optional four-jaw chuck, special circumstances
customizable.
a Electronic Controla
1. Drive motor: the new high-speed closed-loop hybrid servo motor
2. Maximum blanking speed: 8000mm / min
3. Engraving speed: 50 ~ 8000mm / min
4. Processing accuracy: 0.01mm ~ 0.02mm
5. Spindle: Changsheng card 800W / 1500W / 2200W frequency conversion 4 bearing motor, ultra-low noise, high precision (diameter
To runaway a 0.01mm), with 6mm and 12mm sandwich each one.
6. Speed: 2000 ~ 24000 rev / min,
7. Cooling: double water pump cycle cooling, automatic spray cutting system (water pump) water pump
8. System: mach3
9. Step drive power: AC110V ~ 220V, 360W, the output DC36V10A Mingwei switching power supply
10. Input voltage: AC220V (can be customized AC110V)
11. Net weight: 50Kg (excluding packaging)
a Tipsa
1. Compatible with Mach3 / Ivy NCStudio / TYPE3 / ArtCAM / Wentai / JDpaint carved and a variety of CAD / CAM soft
Pieces and so on
2. Instruction format: G code (tap, nc, ncc, text)
3. Users need to own a computer
a Complete standard lista
Engraving machine
2. supporting a control box
3.U disk one (including Mach3 / Weihong and other supporting carving software)
4. Toolbox one (including: engraving tool five, sandwich one, the pressure plate T-type screw nut four sets, pressure plate 4, a hex wrench set, a pump, a knife on the instrument supporting a fine two wrench wrench. )
5. A data line
6. One power cord.
Full set of ready-to-use.