Advance 3-in-1 Dehumidifier With 1 Yr. Warranty (White)

Bullets:-
a cModel :- ALDF120A
a cColour :- White
a cOperation Mode - Automatic with LCD Display
a cWater Tank Full Alarm & Water Continuous Drain Option
a cHumidity Set at will, controlled by humidity sensor defrost automatically
a cAuto shut off when water tank is full
a cLow power consumption & Environment Friendly CFC Free Gas
a c3 in 1 Dehumidifier ( Dehumidification , Filtration and Dryer)
a cEasily movable ( with wheels )
a c1 Year warranty against manufacturing defect

Technical Specifications:
a cDehumidification Capacity :- 12 Ltrs. / Day (at 30a , 80%RH)
a cDehumidifying Air Volume - 100 m3/h
a cCapacity of Water Tank - 2.0L
a cPower Consumption a 230Watts
a cNoise Level a Less than 45 Db Noise
a cHumidity Setting 40-80%
a cUnit Protection IP 24
a cRefrigerant - R134a CFC Free

Product Description:-
Indication
1)Power indication
When power is on, whenever it is running or not, the power indicator shows green
2)Water full indication
When water tank is full, indicator light shows red and the unit will bizz for 15 times and
Then stop. You must empty the water tank and put it back to correct position.
3)Timer indication
.when time on or timer off, the indicator light shows green
4)Low fan speed indication
When running in low fan speed, the low fan speed indicator shows green
5)High fan speed indication
When running in high fan speed, the high fan speed indicator shows red
6)Display
This indicator with 3 functions as below:
1. When the power is on, it shows indoor humidity
2. When you adjust humidity, it shows the selected humidity data
3. When set the timer on/off, it shows the timer data

Control Panel:
1. Power
Press power button to turn on /off the unit. Do not unplug the power cord directly to force the machine stop working directly
For first use, when plug the unit and the buzzer would sound bizz. Press to turn on the unit and the primary humidity is 50%, also with low fan speed.

2. Timer button
24 hours timer
Press timer button to set timer on/off, if you would like to cancel timer setting, press timer button to 00 shown from display.

3. Humidity setting button
Press humidity setting button to adjust humidity as following (The initial humidity is 50%), from 50%a 55%a 60%a 65%a 70%a 75%a 80%a 40%a 45%a 50%. When the indoor humidity is lower than the set humidity, the machine would stop automatically.

4. Fan speed setting button
Press fan speed setting button to adjust the fan speed between HIGH, LOW fan speed.

Water Tank
a cThe Water full indication will show red when water tank is full, warning will be given when capacity 1.5L has been reached.
a cTake out the water tank, empty the water inside.
a cPut the water tank back into the dehumidifier

How to empty the water tank
1)Pull out both sides of water tank
2)Empty the water tank

Cautions!
1)Do not remove the float from the water tank; otherwise, the machine will not stop to work when the water tank is full. Then the water will be overflow that maybe makes damage to your floor.
2)Drain the water collection tank completely when water tank is full and reset your Setting
3)If the water tank is dirty, clean by cool water or warm water, cannot use cleaner, steel wool, chemical rag duster, gas oil, benzene, thinner or other solvent to clean it, otherwise, it would damage the water tank and lead to leakage
4)When put the water tank back to the unit, please use two hands to push the water tank into the machine to the correct position. Or the water full indication will still show red and the machine cannot work.

Continuous drainage
1)Open the cover on the back of the dehumidifier.
2)Take out the water tank
3)Insert a PVC pipe with 9.5mmi inner diameter 9.5mmi , and the recommended length is 300mm; put the other side into a container, such as a bucket.

NOTE: PVC pipe is excluded, need to buy separately.