10.2mv/m/s2 (100mv/g), 2.5mv/m/s2 (25 Mv/g) Accelerometers

We are exporting 10.2mV/m/s2 (100mV/g), 2.5mV/m/s2 (25 mV/g) Accelerometers in Wuxi, Jiangsu, China.

Description i
These accelerometers are intended for critical machinery applications where casing acceleration measurements are
required, such as gear mesh monitoring. It provides an amplitude range of 50g peak and a sensitivity of 100 mV/g.

Specifications i
i Sensitivity: 10.2mV/m/s2 (100mV / g) A 5% at 100Hz
i Acceleration range:
i The overall acceleration is 490m/s2 (50g) peak in frequency between 1Hz to 20kHz. When the vibration frequency exceeds 20kHz, in particular resonant frequency of the sensor, the acceleration range will be severely reduced.
i Amplitude Linearity: in 490m/s2(50g)peak withinA 1%
i Broadband noise floor:0.004g rms; 10Hz to 20kHz
i Frequency response:i
i 10Hz to 15 kHz (600cpm to 900kcpm) A 3dB;
i 30Hz to 10kHz (1.8kcpm to 600kcpm) A 10%
i Mounted resonant frequency: Minimum 30kHz;typical 33kHz
i Amplitude of resonance peak: Maximum 20dB
i Transverse Sensitivity: Sensitivity at 100Hz is less than 5%
i Base strain sensitivity:
i 0.98m/s2 (0.100g) / I stress 0.0049 m/s2 (0.0005g)/ m stress, with accelerometer attached mounting base. Recommend using the mounting base in installing, thereby keep the minimum of the base stress sensitivity
i Bias current: 2mA Rated
i Output bias voltage: Rated-8.5Vdc
i Grounding: Housing insulation
i Maximum cable length: at 305 meters (1000 feet) is no signal attenuation
i Mounting Torque: 3.4N a c m (30in a c lb.)