Low Maintenance Piezoelectric Accelerometers

We export low maintenance Piezoelectric Accelerometers in Wuxi, Jiangsu, China.

Description i
Accelerometers is a case-mounted seismic sensor in general purpose. It is a piezoelectric sensor fixed in hot molded body. This structure makes the accelerometers
extremely durable, well-suited for harsh industrial environments. Two-pin screw-type connector on top of sensor allows easy disassembly of the sensor cable. Bottom of the sensor has a 1/4-28UNF threaded female connector, allowing a variety of installation methods.

Technical Specifications:
Sensitivityi 10.2mV/m/s2 (100mV / g) A 12%, at 80Hz
Frequency responsei 10 to 1kHz A 10%; reference to 80Hz
Acceleration range:i 245m/s2 (25g) peak, at +25 a when used in the entire temperature range of 176m/s2 (18g) peak
Amplitude Linearity:In 9.8m/s2 to 98m/s2 (1g to 10g) peak Within the range of 2%
Transverse sensitivity:At 80Hz is less than 5% of sensitivity
Mounted resonant frequency: Greater than 5kHz
Polarity: When the direction of movement from the mounting stud to the top connector, the output signal is positive
Broadband Electrical Noisei Less than 0.147m/s2 (0.015g) rms
Electrical Isolation (Pin to Case)i 600Vrms
Housing Materiali 316 series stainless steel
Operating and Storage Temperaturei -40 a to +85 a
Relative humidityi 100% relative humidity, non-flooding
Shock Survivabilityi When a fall from 3 feet to compete polyethylene based film covering on the floor, the sensitivity variation is less than 5%