Glass Mosaic Tiles In Mehsana

MOQ5 Square Foot/Square Foots

Tile TypeMosaic Tiles

Tile MaterialCeramic

ApplicationWall Tiles

SizeAs per customer requirement

PatternSquare Edge

MOQ100 Square Centimeter/Square Centimeters

Tile TypeCeramic Tiles

Tile MaterialCeramic

UsageInterior Tiles

ApplicationFloor Tiles

Size30

Thickness8 Millimeter (mm)

MaterialGlass

SizeVaried

ShapeVaried

Thickness3mm

FinishGlossy

ColorBlue

MOQ100 Pack/Packs

Product TypeDecoration

MaterialGlass

ColorMulti Color

Tile TypeMosaic Tiles

Tile MaterialGlass

ApplicationOther Art and Craft Use

EdgeOther Straight Edge

Tile TypeSwimming Pool Tile Other

Tile MaterialCeramic

UsageOther Outdoor and Indoor

ApplicationSwimming Pool Other

Surface TreatmentOther Glossy

MOQ100 Square Foot/Square Foots

EdgeRectified

Tile MaterialMosaic

UsageExterior Tiles

Surface TreatmentFull Body Tiles

Tile FinishGloss

ColorBlues

MOQ1000 Number

Tile TypeMosaic Tiles

Surface TreatmentFull Body Tiles

PatternSquare Edge

FeatureAcid-Resistant Antibacterial Firebrick Heat Insulation

MaterialGlass

DimensionsVariable

Thickness4mm

ColorBeige

FinishMatte

Weight1kg/sheet

MOQ100 Square Foot/Square Foots

ColorBeige Blues Browns / Tans Cream Grays Gold Greens Mixed Multi Color Oranges Reds / Pinks Purple Whites Teal Blacks Yellows / Golds Purples / Lavenders

Tile TypeMosaic Tiles

Tile MaterialCeramic

UsageInterior Tiles

ApplicationFloor Tiles

Surface TreatmentFull Body Tiles Glazed Tiles Polished Tiles

MaterialGlass

ColorBlue

ShapeSquare/Custom

SizeVaried

Thickness10-20 mm

FinishPolished

MOQ4 bags Bag/Bags

Physical FormPowder

Chemical NameConstruction Chemical

TypeGlass Mosaic Tile Adhesive

Application1. Power should be applied with a suitable toothed spreader to be chosen according to the size andcharacteristics of the rear surface of the tiles. It is best to use the smooth part of the trowel to spreada fine initial layer pressing down hard so as to obtain maximum adhesion to the substrate and toregulate water absorption after which the thickness can be adjusted as required by tilting thespreader at an angle.2. Spread the adhesive over a surface area which will allow for laying of the covering materials within the indicated open time and check for suitability of the adhesive at regular intervals. The open time may vary considerably even during the application depending on various factors such as exposure to sunlight air currents absorbency of the substrate temperature and relative humidity of the atmosphere.3. Press down each tile to allow for complete uniform contact with the adhesive. In the case of laying in environments subject to heavy traffic in outdoor locations on underfloor heating systems or with materials4. In general ceramic tiles do not require preliminary treatment however these materials should be checked to ensure they are free from traces of residual dust or materials not properly anchored to the surface.

ColorWhite

ColorBlue

MaterialPlastic

Weight25kg

Volume20L

Pot life24 hours

Coverage10 sqm