Polyanionic Cellulose In Wuxi

AppearanceWhite powder

FeaturesWater loss control High performance Rheology control Salt tolerance Temperature resistance Strong slurry cake Effective filtration Low dosage needed

Filtration loss13.0 ml

PH6.0-8.5

Substitution degree0.85-1.10%

Viscosity (distilled water)50 mPa.s

ColorWhite

FeaturesReduces filtration Increases viscosity Improves hole cleaning Stabilizes viscosity Suspension properties Wide fluid use Effective filtration Oil and gas use

FormPowder

Molecular weightVariable

PH6-8

Packaging25kg bags

MOQ17.5 Metric Ton/Metric Tons

Physical FormSolid

CAS No9004-32-4

Purity95%

AppearanceWhite or yellowish powder

UsageIt is widely used in food medicine daily chemical petroleum papermaking textile construction and other fields in production

AppearanceWhite powder

Carbonization temp252 degree

DSMore than 0.90%

FeaturesStable viscosity Water loss control Good dispersion High purity Heat resistance Salt tolerance Homogeneous reaction Low ash content

PurityMore than 85%

Thermochromic temp227 degree

Apparent Viscosity20-60 cps

Degree of Substitution0.90

FeaturesHigh purity Low filtration Good viscosity Oil well use High temperature Salt water use Rheology control

Filtration11-26

Loss on Drying10.0%

MaterialCellulose

ColorWhite

FeaturesHigh viscosity Salt resistance Heat stability Water soluble Non-toxic Drilling additive Petroleum additive

FormPowder

OdorOdorless

PackagingBottle

SolubilityWater soluble

MOQ1 Metric Ton/Metric Tons

Purity>98%

PropertiesExcellent water solubility high viscosity salt resistance reduces fluid loss in drilling stable in a wide range of pH.

UsageUsed to improve viscosity and reduce water loss in drilling muds

Physical FormPowder

GradeIndustrial Grade

Molecular WeightVaries typically around 100000 - 1000000

MOQ18 Metric Ton/Metric Tons

StorageDry Place

FormOther

TasteOther

Purity99.99%

ClassificationOrganic Chemicals

Chemical NameCelloluse Diacetate Tow

MOQ1 Kilograms/Kilograms

StorageRoom Temperature

Physical FormPowder

MOQ414 Kilograms/Kilograms

Physical FormPowder

StorageRoom Temperature

AppearanceWhite to cream

FeaturesFood grade High viscosity High purity Versatile Stable Safe

PH6.0-8.5

Packaging25kg bag

Particle SizeMin 95% pass 80 mesh

Purity99.5% Min

ColorOff-white

Expiry dateTwo years

FeaturesThickening agent Emulsifier Stabilizer Food grade Versatile use

GradeDetergent grade

Gross weight25.2 kg

Net weight25 kg

Density1.6 g/cm³

FeaturesReduced water loss Low gel strength Excellent stability High temperature Bacteria resistant Suspension Cost effective Increased efficiency

PH6.5-8.5

Packaging25kg bags

Particle SizeMicrometer

Purity99.5%

MOQ1MT Metric Ton/Metric Tons

Viscosity5-5000cps

Moisture (%)10% max

Shelf Life2 Years

Chemical NameSodium Carboxymethylcellulose

CAS No9004-32-4

ApplicationOther

MOQ5000 Kilograms/Kilograms

Shapeother

Physical FormPowder

StorageRoom Temperature

AppearanceWhite Powder

Shelf Life2 Years

UsageApplication1 PAC application in the drilling fluidPAC for fluid loss inhibitors and water is ideal PAC fluid mud can be prepared in high salt medium clay and shale inhibition dispersion and expansion of the shaft so that the pollution under control. 2 PAC workover fluid in the applicationPAC prepared using workover fluid is a low-solid-phase and not because of the solid layer and the blocking of the infiltration capacity of the production would not be harmful to the production floor; and the loss of low water so that production level to reduce the amount of water and access to water emulsion will be formed by blocking phenomenon Township. PAC prepared using workover fluid to provide hydraulic workover other advantages not available. Production level to protect against permanent damage; Clean the hole with a carrying capacity and the maintenance of boreholes to reduce the workload; Resistance to water and sediment have the ability to infiltrate and few foaming; Can be stored or transferred between the wells and wells and workover fluid mud than the average and low cost. 3 PAC in the fracturing fluid applicationsPAC prepared by fracturing fluid capability 2% KCI solution (the preparation of the fracturing fluid must be added) and dissolution performance ease of use you can Site preparation and gel fast strong ability to carry sand. Osmotic pressure in the formation of low use and its fracturing effect of the more remarkable.4.Other applicationsPaper-making and Food field and Paint Industries.