Polyanionic Cellulose In Baoding

Moisture10%

Viscosity40-50 mPa.s

Filtration16-23 mL

Packaging1.25/2.25 kg bags

Starch content10%

API fluidYes

AppearanceWhite powder

DSMore than 0.90%

PurityMore than 85%

ViscosityLess than 50mpa.s

Water contentLess than 10%

Thermochromic temp227 degree

CAS Number9004-32-4

AppearanceCream white powder

Purity≥98%

SolubilityWater soluble

Packaging25kg bags

StorageCool & Dry

FormPowder/Granule

Weight25kg

SolubilityWater soluble

ColorLight yellow

Temperature Resistance150°C

StandardsOCMAAPI

AppearanceWhite Powder

SolubilityWater Soluble

Purity99%

ViscosityVariable

PH6-8

Packaging25kg Bags

ColorWhite

SolubilityWater soluble

OdorOdorless

ToxicityNon-toxic

FormPowder

ViscosityHigh

Degree of Substitution0.90

PH Value6.5-9.0

Purity65.0-98.0%

Loss on Drying10.0%

Apparent Viscosity20-60 cps

Filtration11-26

MOQ1 Metric Ton/Metric Tons

UsageReduces filtration loss stabilizes boreholes

GradeTechnical Grade

Shelf LifeMinimum 24 months in original packaging

Melting PointDecomposes before melting (>200AdegC)

PoisonousNO

CAS No9004-32-4

MOQ414 Kilograms/Kilograms

StorageRoom Temperature

Physical FormPowder

ColorWhite

FormPowder

SolubilityWater soluble

Viscosity5-10000 cps

DS0.4-1.5

Purity50%-99.8%

ColorWhite

Apparent Density0.30-0.70g/cm3

Density1.3g/cm3

SolubilityWater soluble

FormPowder

PH Stability2-12

MOQ1000 Kilograms/Kilograms

PoisonousNO

Physical FormSolid

StorageOther

ApplicationTextile Industry

CAS No010

EINECS No007

AppearanceWhite

UsageCMC usually forms a thick adsorption layer on the surface of clay particles in the drilling fluid to improve the coalescence stability of the system. By adsorption of clay particles to increasing the charge on the surface of the particles thus reducing the electrostatic attraction between particles. Increase the viscosity and plugging effect of the filtrate to reduce the permeability of the filter cake.

GradeGB

Purity100%

PropertiesWhite fibrous or granulated powder. Odorless tasteless has hygroscopic soluble in wateri1/4OEinsoluble in organic solvents.Thermally stablei1/4OEvery stable in alkaline solution easy to hydrolyze when exposed to acid.

StorageOther

MOQ1000 Kilograms/Kilograms

ApplicationIndustrial

PoisonousNO

TasteOdorless

Usagemortar

CAS No5

EINECS No008

MOQ5000 Kilograms/Kilograms

Physical FormPowder

Shapeother

UsageApplication1 PAC application in the drilling fluidPAC for fluid loss inhibitors and water is ideal PAC fluid mud can be prepared in high salt medium clay and shale inhibition dispersion and expansion of the shaft so that the pollution under control. 2 PAC workover fluid in the applicationPAC prepared using workover fluid is a low-solid-phase and not because of the solid layer and the blocking of the infiltration capacity of the production would not be harmful to the production floor; and the loss of low water so that production level to reduce the amount of water and access to water emulsion will be formed by blocking phenomenon Township. PAC prepared using workover fluid to provide hydraulic workover other advantages not available. Production level to protect against permanent damage; Clean the hole with a carrying capacity and the maintenance of boreholes to reduce the workload; Resistance to water and sediment have the ability to infiltrate and few foaming; Can be stored or transferred between the wells and wells and workover fluid mud than the average and low cost. 3 PAC in the fracturing fluid applicationsPAC prepared by fracturing fluid capability 2% KCI solution (the preparation of the fracturing fluid must be added) and dissolution performance ease of use you can Site preparation and gel fast strong ability to carry sand. Osmotic pressure in the formation of low use and its fracturing effect of the more remarkable.4.Other applicationsPaper-making and Food field and Paint Industries.

StorageRoom Temperature

Shelf Life2 Years

AppearanceWhite Powder