Polyanionic Cellulose In Shijiazhuang

API fluidYes

FeaturesFluid loss control Drilling additive High viscosity Effective filtration Easy to use

Filtration16-23 mL

MaterialCellulose

Moisture10%

Packaging1.25/2.25 kg bags

AppearanceWhite powder

Carbonization temp252 degree

DSMore than 0.90%

FeaturesStable viscosity Water loss control Good dispersion High purity Heat resistance Salt tolerance Homogeneous reaction Low ash content

PurityMore than 85%

Thermochromic temp227 degree

AppearanceCream white powder

CAS Number9004-32-4

FeaturesWater purification Drilling thickener High efficiency Safe cleaning Creamy white

Packaging25kg bags

Purity≥98%

Shelf life2 years

ColorLight yellow

FeaturesThickener Water reducer Binder Stabilizer Rheology control Suspending aid High viscosity Temperature resistant

FormPowder/Granule

Packaging25kg bags

SolubilityWater soluble

StandardsOCMAAPI

AppearanceWhite Powder

FeaturesHigh Purity High Viscosity Salt Resistance Fluid Loss Control Temperature Resistance Rheology Modifier Thickener API 13A Compliant

PH6-8

Packaging25kg Bags

Purity99%

SolubilityWater Soluble

ColorWhite

FeaturesHigh viscosity Salt resistance Heat stability Water soluble Non-toxic Drilling additive Petroleum additive

FormPowder

OdorOdorless

PackagingBottle

SolubilityWater soluble

Apparent Viscosity20-60 cps

Degree of Substitution0.90

FeaturesHigh purity Low filtration Good viscosity Oil well use High temperature Salt water use Rheology control

Filtration11-26

Loss on Drying10.0%

MaterialCellulose

MOQ1 Metric Ton/Metric Tons

SolubilitySoluble in water

Molecular Weight~700000 (variable)

Molecular FormulaC6H7O2(OH)2(OCH2COONa)x

HS Code39123100

Physical FormPowder

PropertiesAnionic cellulose ether water-soluble excellent filtration loss control thermal stability salt tolerance

MOQ1 Kilograms/Kilograms

StorageRoom Temperature

Physical FormPowder

MOQ414 Kilograms/Kilograms

Physical FormPowder

StorageRoom Temperature

MOQ1000 Kilograms/Kilograms

PoisonousNO

Physical FormSolid

StorageOther

ApplicationTextile Industry

CAS No010

EINECS No007

AppearanceWhite

UsageCMC usually forms a thick adsorption layer on the surface of clay particles in the drilling fluid to improve the coalescence stability of the system. By adsorption of clay particles to increasing the charge on the surface of the particles thus reducing the electrostatic attraction between particles. Increase the viscosity and plugging effect of the filtrate to reduce the permeability of the filter cake.

GradeGB

Purity100%

PropertiesWhite fibrous or granulated powder. Odorless tasteless has hygroscopic soluble in wateri1/4OEinsoluble in organic solvents.Thermally stablei1/4OEvery stable in alkaline solution easy to hydrolyze when exposed to acid.

StorageOther

MOQ1000 Kilograms/Kilograms

ApplicationIndustrial

PoisonousNO

TasteOdorless

Usagemortar

CAS No5

EINECS No008

MOQ1000 Kilograms/Kilograms

Physical FormPowder

EINECS No007

ApplicationPaints

IngredientsHEC

ShapeGranules

MOQ5000 Kilograms/Kilograms

Shapeother

Physical FormPowder

StorageRoom Temperature

AppearanceWhite Powder

Shelf Life2 Years

UsageApplication1 PAC application in the drilling fluidPAC for fluid loss inhibitors and water is ideal PAC fluid mud can be prepared in high salt medium clay and shale inhibition dispersion and expansion of the shaft so that the pollution under control. 2 PAC workover fluid in the applicationPAC prepared using workover fluid is a low-solid-phase and not because of the solid layer and the blocking of the infiltration capacity of the production would not be harmful to the production floor; and the loss of low water so that production level to reduce the amount of water and access to water emulsion will be formed by blocking phenomenon Township. PAC prepared using workover fluid to provide hydraulic workover other advantages not available. Production level to protect against permanent damage; Clean the hole with a carrying capacity and the maintenance of boreholes to reduce the workload; Resistance to water and sediment have the ability to infiltrate and few foaming; Can be stored or transferred between the wells and wells and workover fluid mud than the average and low cost. 3 PAC in the fracturing fluid applicationsPAC prepared by fracturing fluid capability 2% KCI solution (the preparation of the fracturing fluid must be added) and dissolution performance ease of use you can Site preparation and gel fast strong ability to carry sand. Osmotic pressure in the formation of low use and its fracturing effect of the more remarkable.4.Other applicationsPaper-making and Food field and Paint Industries.