Polyanionic Cellulose

Product DescriptionPolypac (UL) FED PAC UL polyanionic cellulose (PAC) is a high-quality, water-soluble polymer designed to control fluid loss and, because it is an Ultra-Low (UL) additive, it causes a minimal increase in viscosity in water-base muds Properties Physical appearance- White, free- flowing powder Spec

MOQ1000 Kilograms/Kilograms

PropertiesPolyanionic cellulose has good heat stability and salt tolerance, and has strong antibacterial properties. Widely used in oil drilling, especially salt water wells and offshore oil drilling.

Physical FormSolid

ShapeGranules

GradeIndustrial

ShapeIrregular

ApplicationIndustrial

Product DescriptionThese Poly Anionic Cellulose are highly effective and guarantee no negative effects. These Poly Anionic Cellulose are manufactured by our experienced and qualified team members. The extensive array of chemicals that are commonly used in varied laboratories can be availed from us. These chemicals are

MOQ10 Metric Ton/Metric Tons

Appearancewhite or light yellow free-flowing powder

Physical FormPowder

PoisonousNO

Product DescriptionWe are engaged in offering excellent quality Polyanionic Cellulose to our valuable clients. Oil drilling use polyanionic cellulose PAC (1) Uniform D.S, good transparency, controllable viscosity and filtration loss; (2) Fit for water-based mud of fresh water, seawater and saturation salt water; (3) C

Product DescriptionWe are famous brand for making, exporting and supplying huge range of Good Water Retention Ability Cellulose Ether HPMC from Xingtai, Hebei, China. Specifications as given below:- Specifications:- Appearance: white powder Gel temperature: 62-65/75-90 PH value: 5.0-8.0 Viscosity, pma.s(by 2% NDJ-1):

Product DescriptionWe are engaged in trading, exporting and supplying excellent quality PAC (Polyanionic Cellulose) in Tianjin, Tianjin, China. PAC is a high quality polyanionic cellulose polymer, its purity is availabe at 90%, 95% or 98%. and Tech-grade PAC is available in the purity of 75% min. Clients can avail thi

Product DescriptionFollowing are the Main Technical Specifications of PAC (Polyanionic Cellulose) :- Starch or starch derivatives without Moisture (mass fraction) % 10 Apparent viscosity (mpa. S) 40 Filtration/mL 16 Starch or starch derivatives without Moisture (mass fraction) % 10 Apparent viscosity (mpa. S) 50 API f

Product DescriptionOur range of PAC (Polyanionic Cellulose) is for water-based drilling fluids, which can effectively reduces the filtration rate of many water-based oil and gas drilling fluids and may also be used to increase and stabilize viscosity to improve hole cleaning and suspension properties in a wide variety

Product DescriptionWe are instrumental in providing to our valuable customers excellent quality CAB which is available with following specification:- 1. Cocoamidopropyl Betaine (CAB) 2. CAS No: 61789-40-0 3. Structural formula: RCONH(CH2)3N+(CH3)2CH2COO 4. Packing: 50/200KG Plastic Drums Properties and the application

MOQ5000 Kilograms/Kilograms

Physical FormPowder

Shapeother

UsageApplication1, PAC application in the drilling fluidPAC for fluid loss inhibitors and water is ideal, PAC fluid mud can be prepared in high salt medium clay and shale inhibition dispersion and expansion of the shaft so that the pollution under control. 2, PAC workover fluid in the applicationPAC prepared using workover fluid is a low-solid-phase, and not because of the solid layer and the blocking of the infiltration capacity of the production would not be harmful to the production floor; and the loss of low water, so that production level to reduce the amount of water, and access to water emulsion will be formed by blocking phenomenon Township. PAC prepared using workover fluid to provide hydraulic workover other advantages not available. Production level to protect against permanent damage; Clean the hole with a carrying capacity, and the maintenance of boreholes to reduce the workload; Resistance to water and sediment have the ability to infiltrate and few foaming; Can be stored or transferred between the wells and wells, and workover fluid mud than the average and low cost. 3, PAC in the fracturing fluid applicationsPAC prepared by fracturing fluid capability 2% KCI solution (the preparation of the fracturing fluid must be added) and dissolution performance, ease of use, you can Site preparation, and gel fast, strong ability to carry sand. Osmotic pressure in the formation of low use, and its fracturing effect of the more remarkable.4.Other applicationsPaper-making and Food field and Paint Industries.