Polyanionic Cellulose In Qingdao

MOQ17.5 Metric Ton/Metric Tons

Physical FormSolid

CAS No9004-32-4

Purity95%

AppearanceWhite or yellowish powder

UsageIt is widely used in food medicine daily chemical petroleum papermaking textile construction and other fields in production

MOQ1000 Kilograms/Kilograms

PropertiesPolyanionic cellulose has good heat stability and salt tolerance and has strong antibacterial properties. Widely used in oil drilling especially salt water wells and offshore oil drilling.

Physical FormSolid

ShapeGranules

Product TypeChemicals

AppearanceWhite

StorageOther

AppearanceWhite powder

FeaturesWater loss control High performance Rheology control Salt tolerance Temperature resistance Strong slurry cake Effective filtration Low dosage needed

Filtration loss13.0 ml

PH6.0-8.5

Substitution degree0.85-1.10%

Viscosity (distilled water)50 mPa.s

AppearanceWhite powder

Carbonization temp252 degree

DSMore than 0.90%

FeaturesStable viscosity Water loss control Good dispersion High purity Heat resistance Salt tolerance Homogeneous reaction Low ash content

PurityMore than 85%

Thermochromic temp227 degree

Apparent Viscosity20-60 cps

Degree of Substitution0.90

FeaturesHigh purity Low filtration Good viscosity Oil well use High temperature Salt water use Rheology control

Filtration11-26

Loss on Drying10.0%

MaterialCellulose

ColorWhite

FeaturesHigh viscosity Salt resistance Heat stability Water soluble Non-toxic Drilling additive Petroleum additive

FormPowder

OdorOdorless

PackagingBottle

SolubilityWater soluble

MOQ1 Metric Ton/Metric Tons

Purity>98%

PropertiesExcellent water solubility high viscosity salt resistance reduces fluid loss in drilling stable in a wide range of pH.

UsageUsed to improve viscosity and reduce water loss in drilling muds

Physical FormPowder

GradeIndustrial Grade

Molecular WeightVaries typically around 100000 - 1000000

MOQ18 Metric Ton/Metric Tons

StorageDry Place

FormOther

TasteOther

Purity99.99%

ClassificationOrganic Chemicals

Chemical NameCelloluse Diacetate Tow

MOQ1 Kilograms/Kilograms

StorageRoom Temperature

Physical FormPowder

MOQ414 Kilograms/Kilograms

Physical FormPowder

StorageRoom Temperature

AppearanceWhite powder

FeaturesHigh purity Thickening agent Smooth texture Stable emulsion Excellent foam Good viscosity

Moisture<10%

PH6.0-8.0

Packaging25kg bags

Particle sizeVariable

ColorWhite

FeaturesThickening agent Smooth texture Foam booster Stability Good mouthfeel

GradeToothpaste grade

Packaging25kg bags

PurityHigh purity

Shelf life2-4 years

Density1.6 g/cm³

FeaturesHigh purity High viscosity Emulsion stability Pigment adhesion Viscosity improvement Anti-splash Sag resistance Workability enhancement

Packaging25kg bags

Particle sizeMicrometer

Purity99.5%

Shelf life2-4 years

Product DescriptionSupported by a team of skilled and experienced professionals we manufacture and exporter a wide array of Paper Making Grade Carboxymethyl Cellulose (CMC). Details : Sodium Carboxymethyl Cellulose is used in paper making industry as paper sizing agent it can obvious increase the dry intensity wet s

MOQ5000 Kilograms/Kilograms

Shapeother

Physical FormPowder

StorageRoom Temperature

AppearanceWhite Powder

Shelf Life2 Years

UsageApplication1 PAC application in the drilling fluidPAC for fluid loss inhibitors and water is ideal PAC fluid mud can be prepared in high salt medium clay and shale inhibition dispersion and expansion of the shaft so that the pollution under control. 2 PAC workover fluid in the applicationPAC prepared using workover fluid is a low-solid-phase and not because of the solid layer and the blocking of the infiltration capacity of the production would not be harmful to the production floor; and the loss of low water so that production level to reduce the amount of water and access to water emulsion will be formed by blocking phenomenon Township. PAC prepared using workover fluid to provide hydraulic workover other advantages not available. Production level to protect against permanent damage; Clean the hole with a carrying capacity and the maintenance of boreholes to reduce the workload; Resistance to water and sediment have the ability to infiltrate and few foaming; Can be stored or transferred between the wells and wells and workover fluid mud than the average and low cost. 3 PAC in the fracturing fluid applicationsPAC prepared by fracturing fluid capability 2% KCI solution (the preparation of the fracturing fluid must be added) and dissolution performance ease of use you can Site preparation and gel fast strong ability to carry sand. Osmotic pressure in the formation of low use and its fracturing effect of the more remarkable.4.Other applicationsPaper-making and Food field and Paint Industries.