Polyanionic Cellulose In Shanghai

AppearanceWhite powder

Water content9%

Substitution degree0.85-1.10%

PH6.0-8.5

Viscosity (distilled water)50 mPa.s

Viscosity (saturated brine)50 mPa.s

ColorWhite

FormPowder

SolubilityWater-soluble

PH6-8

Molecular weightVariable

Purity99%

MOQ17.5 Metric Ton/Metric Tons

Molecular Formula[C6H7O2(OH)x(OCH2COONa)y]n

UsageIt is widely used in food medicine daily chemical petroleum papermaking textile construction and other fields in production

Physical FormSolid

CAS No9004-32-4

AppearanceWhite or yellowish powder

AppearanceWhite powder

DSMore than 0.90%

PurityMore than 85%

ViscosityLess than 50mpa.s

Water contentLess than 10%

Thermochromic temp227 degree

Degree of Substitution0.90

PH Value6.5-9.0

Purity65.0-98.0%

Loss on Drying10.0%

Apparent Viscosity20-60 cps

Filtration11-26

ColorWhite

SolubilityWater soluble

OdorOdorless

ToxicityNon-toxic

FormPowder

ViscosityHigh

MOQ1 Metric Ton/Metric Tons

UsageReduces filtration loss stabilizes boreholes

GradeTechnical Grade

Shelf LifeMinimum 24 months in original packaging

Melting PointDecomposes before melting (>200AdegC)

PoisonousNO

CAS No9004-32-4

MOQ18 Metric Ton/Metric Tons

TasteOther

StorageDry Place

Purity99.99%

FormOther

ClassificationOrganic Chemicals

Chemical NameCelloluse Diacetate Tow

MOQ414 Kilograms/Kilograms

StorageRoom Temperature

Physical FormPowder

AppearanceWhite to cream

Particle SizeMin 95% pass 80 mesh

Purity99.5% Min

Viscosity1500-2000 mPa.s

Substitution Degree0.6-0.9

PH6.0-8.5

GradeDetergent grade

Net weight25 kg

Gross weight25.2 kg

Production dateAug 05 2006

Expiry dateTwo years

Packaging25kg bags

Purity99.5%

ViscosityVariable

Particle SizeMicrometer

SolubilityWater

Density1.6 g/cm³

PH6.5-8.5

MOQ1MT Metric Ton/Metric Tons

Viscosity5-5000cps

Moisture (%)10% max

Shelf Life2 Years

Chemical NameSodium Carboxymethylcellulose

CAS No9004-32-4

ApplicationOther

MOQ1MT Metric Ton/Metric Tons

Ash %5% max

Shelf Life2 Years

Viscosity100-6000cps

GradePaint/ Cosmetic/ Oil drilling/ Detergent/ Oil drilling

Moisture (%)5% max

Appearancewhite powder

MOQ5000 Kilograms/Kilograms

Physical FormPowder

Shapeother

UsageApplication1 PAC application in the drilling fluidPAC for fluid loss inhibitors and water is ideal PAC fluid mud can be prepared in high salt medium clay and shale inhibition dispersion and expansion of the shaft so that the pollution under control. 2 PAC workover fluid in the applicationPAC prepared using workover fluid is a low-solid-phase and not because of the solid layer and the blocking of the infiltration capacity of the production would not be harmful to the production floor; and the loss of low water so that production level to reduce the amount of water and access to water emulsion will be formed by blocking phenomenon Township. PAC prepared using workover fluid to provide hydraulic workover other advantages not available. Production level to protect against permanent damage; Clean the hole with a carrying capacity and the maintenance of boreholes to reduce the workload; Resistance to water and sediment have the ability to infiltrate and few foaming; Can be stored or transferred between the wells and wells and workover fluid mud than the average and low cost. 3 PAC in the fracturing fluid applicationsPAC prepared by fracturing fluid capability 2% KCI solution (the preparation of the fracturing fluid must be added) and dissolution performance ease of use you can Site preparation and gel fast strong ability to carry sand. Osmotic pressure in the formation of low use and its fracturing effect of the more remarkable.4.Other applicationsPaper-making and Food field and Paint Industries.

StorageRoom Temperature

Shelf Life2 Years

AppearanceWhite Powder