Zigbee Wireless Device For Industrial Control And Monitoring (Sz02-rs485-200m)

Zigbee Wireless Device For Industrial Control And Monitoring (Sz02-Rs485-200m) is zigbee-advanced module which is integrated with zigbee 2.4G RF modem and MCU. It is designed to operate within the ZigBee protocol and support the unique needs of low-cost, low-power wireless sensor networks.

Wireless communication
1. Distancei 200m at sight
2. Network typei star, line or mesh
3. Channel detection i CSMA-CA and GTS CSMA-CA
4. Network capacity : 65535
5. Node type: coordinator, router or end device (can be set )

Data interfacei
1. Maximum data packet i 100 bytes
2. Data interface: RS485
3. Serial rate: 1,200 ~ 115,200 bps (optional)
4. Serial parity : None, Even, Odd
5. Data bit: 7 or 8
6. Stop bit: 1

Transceiver:
1. Modulation mode: DSSS direct sequence spread spectrum
2. Frequency range: 2.405GHz~ 2.480GHz
3. Wireless channel: 16
4. Receiver sensitivity: -92dbm
5. Transmit power output: 3dBm
6. Antenna: The outer SMA antenna
7. Size: 90mm*81mm*25mm (length*width*height)

Poweri
1. Input voltage: 5V-24V broad voltage
2. Average current: 50mA
3. Maximum receiving current: 160mA
4. Standby current: 10mA
5. Power saving mode: 110uA
6. Sleep pattern: 56uA

Working environment:
1. Working temperature: -40i C ~ 85i C
2. Storage temperature: -55i C ~ 125i C

Applications:
1. Wireless alarm fire safety
2. Building control
3. Wireless sensorsa network
4. Wireless industrial monitoring and control
5. Wireless intelligent traffic light control