Vertical Multi Stage Centrifugal Pumps Crdl

Our range of Vertical Multi Stage Centrifugal Pumps CRDL are vertical multi stage single suction segmental centrifugal pump. It can delivery clear water or other liquid which is physically or chemically similar to clear water. The temperature of the liquid is 0 a -80 a . The inlet pressure of pump should be less than 0.6MPa.
CRDL series pump is vertically installed with advantage of compact structure, low noise and space saving. It is widely used for feeding water in high buildings in city, heat supply system, fire control system, air conditioning system and water supply systems.
Performance range
Capacity: 8-432mA /h
Head: 20-280m
Instruction of pump type

For example:65CRDL32-15X5
65i Inlet diameter of the pump is 65mm
CRi Company code, means produced by CREDO PUMP
DLi Vertical multi stage centrifugal pump
32i Rate flow 32mA /h
15i Rate head of each stage 15m
5i Pump stage is 5
Structure
The inlet is located in suction stage under pump; the outlet is located in discharge stage above pump. Both of the inlet and outlet are horizontally mounted. The outlet can be installed with the angle 90A ,180A and 270A against the inlet according to usersa requirement (usually the inlet and outlet are codirectional). The main part of pump consists of suction stage, middle stage, discharge stage, diffusor, bearing frame, shaft, impeller, balance drum and shaft sleeves. The axial force is balanced by balance kettle and the remaining axial force is borne by upper radial thrust force ball bearing.