Variable Frequency Inverter Ac Drives Motor Speed Controller Standard: Iso Standard

We manufacture, export and supply a Variable Frequency Inverter AC Drives Motor Speed Controller in Shenzhen, Guangdong, China.

I/OInput220VA 15% Single phase 380VA 15% 3phase 50/60Hz
Output0~ rated input voltage 3phase 0-500Hz
Basic functions
Max. frequency500Hz
Carrier frequency0.5kHz-16kHz, can be auto adjusted according to load.
Speed Control AccuracyDigital setting 0.01H
Control ModeSenseless vector control-SVC-
Flux vector control-FVC-
V/F control
Starting Torque0.5Hz/150%(SVC) ; 0Hz/180%(FVC)
Speed adjusting range1 200-SVC- 1:1000(FVC) 1:50(V/F)
Speed control accuracyA 0.5%-SVC- A 0.02%(FVC)
Torque control accuracyA 5%(FVC)
Overload Capability150% rated current 60s,180% rated current 3s
Torque boostautomatic torque boost-hand torque boost 0.1%~30.0%
V/F curveliner; Multi-point type; N times square, V/F curve (1.2 times square, 1.4 times square-1.6 times square,1.8 times square,2 times square)
V/F separationTwo types:full separation-half separation
ACC./DEC. curveLiner or S curve ACC./DCC. Mode; Four types ACC./DCC. Time; ACC./DCC time range 0.0s-6500.0s.
DC brakeDC brake frequency 0.00Hz~Max. frequency; Braking time: 0.0s-36.0s; Braking current 0.0%-100.0%
JOG controlJOG frequency range 0.00Hz-50.00Hz; JOG ACC./DCC time 0.0s-6500.0s
Simple PLC16 steps speed can be set by in built PLC or terminals.
Inner PIDcan realize close loop process control system
Automatic voltage regulationcan output constant voltage even grid voltage fluctuates.
Over voltage and over current controlautomatic limitation to running voltage and current to avoid frequent tripping
Fast limitation of currentTo minimize over current faulty to make running smoothly.
Common DC BUS
Multi frequency inverters share DC common BUS.
QUICK keyfive options main menu- advanced menu-monitoring menu-checking menu- user define menu
MJOG keyProgrammable key commend channel switch/ FWD and Rev running/JOG running
Textile swing controlTriangular wave frequency control function
Timing controlsetting range 0H-65535H
OperationRunning command givingthree channels keypad giving-terminals giving-RS485 giving. All of which can be switched to each other.
Frequency sourceTotal 10 frequency source,digital giving-analog voltage giving-analog current giving- impulse giving- RS485 giving. All of which can be switched to each other.
Input terminalsFive digital inputs-one of which can be used as high speed impulse input, the Max. Frequency can reach 100kHz. This can be extended to ten inputs and compatible.
Source PNP or NPN input.
two analog input terminals, VCI only can be used as voltage input, the CCI can be used as voltage or current input (650S can be used as current input) ( one voltage input terminal can be extended)
Output terminalsOne high speed impulse output terminal (can be set into open circuit collector), 0kHz~100kHz square wave output, can output setting frequency or outputting frequency.
One digital output-can be extended into two-
One Relay output-can be extended into two-
One analog output-can be extended into two--0mA-20mA or 0v-10V selectable -can output setting frequency or outputting frequency.
Virtue I/O5 virtual DI,5 virtual DO
Keypad operationLED displayto display parameters
Key lock and Key function selectionKey lock and Key function selection
Protection functionmotor shortcut detection-input output phase lost protection, over current protection, over voltage protection, low voltage protection, over heat protection, over load protection.
Accessoriesmulti function input and output extension cards-braking parts-telecommunication card-PG card-user programmable.
EnvironmentRunning environmentindoor avoid sunlight, avoid dust-erosion gas-flammable gas, oil mist-steam vapor-water drop-salt etc.
Altitudeunder 1000m
Environmental Temperature-10 ~ +40. Duration above 40
Humidityunder 95%RH, no water condensation
Vibrationunder 5.9m/s(0.6g)
Storage temperature-20 ~ +60