Th8300 Modular Programmable Dc Electronic Load

TH8300 Modular programmable DC electronic load

- TH8300 series programmable DC electronic load performance characteristics
- The maximum power of the whole machine is 2500W, and the maximum online current is 400A.
- The maximum power of the module is 500W, the maximum current is 80A, and the maximum voltage is 600V.
- 0.1mV/10I A high resolution
- Dynamic frequency up to 50kHz
- Up to 500kHz sampling speed
- 12 advanced testing functions
- Modular design supports each module to operate independently
- The number of storage files for a single module module is 40
- A single machine supports up to five modules in parallel and up to ten channels.
- Connected through CAN interface, supports up to four complete machines online
- 24-bit color 2.8-inch color LCD display
- Chinese and English operation interface
- Data logging function
- Smart fan system
- Support power-on hold function
- Support timing function
- Electrical isolation, external input and output
- Supports over-current protection (OCP), over-voltage protection (OVP), over-power protection (OPP), over-temperature protection (OTP), reverse polarity protection (REV), and low voltage protection (LVP)

The TH8300/TH8310 series of programmable DC electronic loads adopt a modular design. Users can choose modules with different parameters for free combination according to their own needs.

All modules can be set up and run independently, and can be operated as master-slave. Parallel operation between modules is supported, and four units can be connected online between the entire machines.
The module has a dual-core (MCU+DSP) automatic control hardware circuit architecture, making the system run super stable. Complete circuit protection function and intelligent fan system provide comprehensive protection for the instrument itself and the object under test. It adopts high-speed, safe and reliable 16-bit sampling chip to ensure sampling accuracy and resolution.
TH8300 series programmable DC electronic loads include the following types of modules (TH8301-80-20 and TH8301A-80-20 are dual-channel modules):
Any number of modules can be connected online for master-slave operation. The connection type is divided into power mode and copy mode. In power mode, the modules participating in the connection allocate the load current in proportion to the maximum current. In the copy mode, all modules participating in the connection load the current value set by the host module.

Application:
- Power supply
- Chargers, switching power supplies, communication power supplies, LED drivers, mobile phone batteries, power banks, etc.
- New energy
- Solar cells, new energy vehicles, electric bicycles
- Electronic power components
- Fuse/connector/relay/sensor
- Automated equipment integration testing